I can't add a disc

[virusbcn]

I have a problem, I mounted a small freenas with a simple new disk, in less than two weeks began to give me problems of smart, 2 defective sectors, I asked for another new disk and copied the data from the damaged to the new, now I have removed the damaged disk, I have removed it from disks I have even removed the pool, but does not let me create a new pool, I see the disk but when I make the new pool and I want to add the disk does not appear any ?
I don't know what to do, apart from resetting the freenas and starting from scratch
what can i do????

Translated with www.DeepL.com/Translator (free version)

 

[joeschmuck]

I do not completely understand what you are saying, there what what I'm reading.

1. You had a bad drive and you copied all the data from the bad drive on to a new drive, but you did not say how you copied the data.
2. I do not understand anything else you typed. I understand you may be using a language translator but break it apart into separate actions.

My advice (not knowing what you really did):
1. Backup your data somewhere safe.
2. Destroy your pool, if you cannot destroy your pool then re-partition it using some partition tool to delete all the partitions.
3. Add the drive to FreeNAS/TrueNAS and create a new VDEV/Pool.
4. Create any Datasets you desire.
5. Copy the data back to your new dataset(s).

I hope this helps.

 

[virusbcn]

I finally reinstalled Truenas from scratch, added the existing pool and recovered the backup and everything worked again
For some strange reason, I didn't detect the disk, it appeared in the disk list but then it wouldn't let me add it to the pool
It is the latest version of TrueNAS, maybe some small bug
Thank you for your help @joeschmuck