daftu
Cadet
- Joined
- Mar 31, 2021
- Messages
- 7
Hi,
I'm new in TrueNAS community and trying to get working my first server.
I've HP dl380e G8 with P822 turned into HBA mode.
Attached disk are directly visible in TrueNAS and I can read all disk S.M.A.R.T. informations, create zpools etc.
The problem is with hot swap. After inserting new drive I got following messages in server console:
Finally the drive is not visible in Disk menu. There is no /dev/daX for a new drive.
This is supported SAS WD drive but no matter what drive I hot swap it's not being detected.
After OS reboot the drive is normally available.
Hot Swap is very important in case of disk failure etc. How can I fix this?
I'm new in TrueNAS community and trying to get working my first server.
I've HP dl380e G8 with P822 turned into HBA mode.
Attached disk are directly visible in TrueNAS and I can read all disk S.M.A.R.T. informations, create zpools etc.
The problem is with hot swap. After inserting new drive I got following messages in server console:
ciss0: *** Hot-plug drive inserted, Port=5I Box=1 Bay=13 SN=XXXXX
ciss0: error detecting logical drive configuration (target status)
ciss0: Warning, cannot get physical lin list
Finally the drive is not visible in Disk menu. There is no /dev/daX for a new drive.
This is supported SAS WD drive but no matter what drive I hot swap it's not being detected.
After OS reboot the drive is normally available.
Hot Swap is very important in case of disk failure etc. How can I fix this?