Thomymaster
Contributor
- Joined
- Apr 26, 2013
- Messages
- 142
Hi
Another question:
I have my vSphere 5.5 environment setup using a zVol based extent on my FreeNas box (still on 9.2.1.6 but i want to upgrade soon to 9.3, so here comes the question).
The 9.3 manual says (http://doc.freenas.org/9.3/freenas_intro.html#zfs-primer) that when using ISCSI, the pool (including i.e. datasets for CIFS) should never exceed 50%.
Then the ISCSI extent manual page says (http://doc.freenas.org/9.3/freenas_sharing.html#extents) that an extent should not exceed 50% for fragmentation.
OK, now i'm a bit confused.
Should i set both values to 50%?
Target Global Configuration -> Pool Available Space Threshold -> 50
Extents -> Properties of the ESXi extent -> Available Space Threshold -> 50
Cheers Thomy
Another question:
I have my vSphere 5.5 environment setup using a zVol based extent on my FreeNas box (still on 9.2.1.6 but i want to upgrade soon to 9.3, so here comes the question).
The 9.3 manual says (http://doc.freenas.org/9.3/freenas_intro.html#zfs-primer) that when using ISCSI, the pool (including i.e. datasets for CIFS) should never exceed 50%.
Then the ISCSI extent manual page says (http://doc.freenas.org/9.3/freenas_sharing.html#extents) that an extent should not exceed 50% for fragmentation.
OK, now i'm a bit confused.
Should i set both values to 50%?
Target Global Configuration -> Pool Available Space Threshold -> 50
Extents -> Properties of the ESXi extent -> Available Space Threshold -> 50
Cheers Thomy