davidkierz
Cadet
- Joined
- Dec 10, 2013
- Messages
- 3
i am getting high checksum errors on my pool.
these numbers are 24 hours after i zeroed everything out with a zpool clear and did a scrub.
my smartctl shows no errors, normal temps.
I am exporting a snapshot of my data before i power down and check connections etc
its a 6 core AMD Phenom(tm) II X6 1055T with 16 gigs of non ecc memory
I am wondering if there is really a hardware error?
Suggestions on what to do?
these numbers are 24 hours after i zeroed everything out with a zpool clear and did a scrub.
Code:
pool: WDRED state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub repaired 15.1G in 25h37m with 0 errors on Thu Mar 20 13:20:36 2014 config: NAME STATE READ WRITE CKSUM WDRED ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/35cd37b2-61ea-11e3-9443-8c89a51936b2 ONLINE 0 0 121K gptid/3658a56c-61ea-11e3-9443-8c89a51936b2 ONLINE 0 0 238K gptid/3734b175-61ea-11e3-9443-8c89a51936b2 ONLINE 0 0 0
my smartctl shows no errors, normal temps.
I am exporting a snapshot of my data before i power down and check connections etc
its a 6 core AMD Phenom(tm) II X6 1055T with 16 gigs of non ecc memory
I am wondering if there is really a hardware error?
Suggestions on what to do?