Help with SMART results (pre-fail)

Status
Not open for further replies.

flyinfitz1

Explorer
Joined
Mar 29, 2013
Messages
91
Just need a little help with a my results on SMART tests. A few elements show pre-fail but the raw counts on the big ticket items are 0. Drives are a few years old and are close to out of warranty I believe.

Code:
=== START OF READ SMART DATA SECTION ===																							
SMART Attributes Data Structure revision number: 16																				 
Vendor Specific SMART Attributes with Thresholds:																				   
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE									
  1 Raw_Read_Error_Rate	 0x002f   200   200   051	Pre-fail  Always	   -	   0											
  3 Spin_Up_Time			0x0027   183   180   021	Pre-fail  Always	   -	   5808										 
  4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   28										   
  5 Reallocated_Sector_Ct   0x0033   200   200   140	Pre-fail  Always	   -	   0											
  7 Seek_Error_Rate		 0x002e   200   200   000	Old_age   Always	   -	   0											
  9 Power_On_Hours		  0x0032   075   075   000	Old_age   Always	   -	   18680										
10 Spin_Retry_Count		0x0032   100   253   000	Old_age   Always	   -	   0											
11 Calibration_Retry_Count 0x0032   100   253   000	Old_age   Always	   -	   0											
12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   28										   
192 Power-Off_Retract_Count 0x0032   200   200   000	Old_age   Always	   -	   17										   
193 Load_Cycle_Count		0x0032   200   200   000	Old_age   Always	   -	   1482										 
194 Temperature_Celsius	 0x0022   114   109   000	Old_age   Always	   -	   36										   
196 Reallocated_Event_Count 0x0032   200   200   000	Old_age   Always	   -	   0											
197 Current_Pending_Sector  0x0032   200   200   000	Old_age   Always	   -	   0											
198 Offline_Uncorrectable   0x0030   100   253   000	Old_age   Offline	  -	   0											
199 UDMA_CRC_Error_Count	0x0032   200   200   000	Old_age   Always	   -	   0											
200 Multi_Zone_Error_Rate   0x0008   200   200   000	Old_age   Offline	  -	   0


Code:
=== START OF READ SMART DATA SECTION ===																							
SMART Self-test log structure revision number 1																					 
Num  Test_Description	Status				  Remaining  LifeTime(hours)  LBA_of_first_error									 
# 1  Short offline	   Completed without error	   00%	 18576		 -													 
# 2  Extended offline	Completed without error	   00%	 18490		 -													 
# 3  Short offline	   Completed without error	   00%	 18408		 -													 
# 4  Short offline	   Completed without error	   00%	 18192		 -													 
# 5  Extended offline	Completed without error	   00%	 18106		 -													 
# 6  Short offline	   Completed without error	   00%	 18024		 -													 
# 7  Short offline	   Completed without error	   00%	 17856		 -													 
# 8  Extended offline	Completed without error	   00%	 17770		 -													 
# 9  Short offline	   Completed without error	   00%	 17689		 -													 
#10  Short offline	   Completed without error	   00%	 17449		 -													 
#11  Extended offline	Completed without error	   00%	 17363		 -													 
#12  Short offline	   Completed without error	   00%	 17281		 -													 
#13  Short offline	   Completed without error	   00%	 17114		 -													 
#14  Extended offline	Completed without error	   00%	 17027		 -													 
#15  Short offline	   Completed without error	   00%	 16946		 -													 
#16  Extended offline	Completed without error	   00%	 16740		 -													 
#17  Short offline	   Completed without error	   00%	 16658		 -													 
#18  Extended offline	Completed without error	   00%	 16437		 -													 
#19  Short offline	   Completed without error	   00%	 16355		 -													 
#20  Short offline	   Completed without error	   00%	 16115		 -													 
#21  Extended offline	Completed without error	   00%	 16029		 -
 

Bidule0hm

Server Electronics Sorcerer
Joined
Aug 5, 2013
Messages
3,710
Pre fail is the type of the field, not the status of the field. I don't see any problem with this drive.
 

flyinfitz1

Explorer
Joined
Mar 29, 2013
Messages
91
Much appreciated, thanks!
 

DrKK

FreeNAS Generalissimo
Joined
Oct 15, 2013
Messages
3,630
Much appreciated, thanks!
Indeed. If you'd like sir, you can give us the full output of
Code:
smartctl -x /dev/ada0
(replacing the ada0 with each of your drive designators), preferably in "code" tags, or in pastebin, and we'll be happy to take a look at the drive and its history and give you an analysis. The drive is nearing 20000 hours of operation, so now is a good time to have someone that knows what they're doing take a look at the full info.
 

flyinfitz1

Explorer
Joined
Mar 29, 2013
Messages
91
Sorry for the late response. Here is the full read out.

Code:
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Red
Device Model:	 WDC WD30EFRX-68EUZN0
Serial Number:	WD-WCC4NDRX32KS
LU WWN Device Id: 5 0014ee 20ad3a331
Firmware Version: 82.00A82
User Capacity:	3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:	 512 bytes logical, 4096 bytes physical
Rotation Rate:	5400 rpm
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Wed Jul 26 17:43:45 2017 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
										was never started.
										Auto Offline Data Collection: Disabled.
Self-test execution status:	  (   0) The previous self-test routine completed
										without error or no self-test has ever
										been run.
Total time to complete Offline
data collection:				(39540) seconds.
Offline data collection
capabilities:					(0x7b) SMART execute Offline immediate.
										Auto Offline data collection on/off supp																															   ort.
										Suspend Offline collection upon new
										command.
										Offline surface scan supported.
										Self-test supported.
										Conveyance Self-test supported.
										Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
										power-saving mode.
										Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
										General Purpose Logging supported.
Short self-test routine
recommended polling time:		(   2) minutes.
Extended self-test routine
recommended polling time:		( 397) minutes.
Conveyance self-test routine
recommended polling time:		(   5) minutes.
SCT capabilities:			  (0x703d) SCT Status supported.
										SCT Error Recovery Control supported.
										SCT Feature Control supported.
										SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAGS	VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate	 POSR-K   200   200   051	-	0
  3 Spin_Up_Time			POS--K   181   176   021	-	5908
  4 Start_Stop_Count		-O--CK   100   100   000	-	105
  5 Reallocated_Sector_Ct   PO--CK   200   200   140	-	0
  7 Seek_Error_Rate		 -OSR-K   200   200   000	-	0
  9 Power_On_Hours		  -O--CK   074   074   000	-	18991
 10 Spin_Retry_Count		-O--CK   100   100   000	-	0
 11 Calibration_Retry_Count -O--CK   100   253   000	-	0
 12 Power_Cycle_Count	   -O--CK   100   100   000	-	74
192 Power-Off_Retract_Count -O--CK   200   200   000	-	19
193 Load_Cycle_Count		-O--CK   200   200   000	-	1613
194 Temperature_Celsius	 -O---K   114   109   000	-	36
196 Reallocated_Event_Count -O--CK   200   200   000	-	0
197 Current_Pending_Sector  -O--CK   200   200   000	-	0
198 Offline_Uncorrectable   ----CK   100   253   000	-	0
199 UDMA_CRC_Error_Count	-O--CK   200   200   000	-	0
200 Multi_Zone_Error_Rate   ---R--   200   200   000	-	0
							||||||_ K auto-keep
							|||||__ C event count
							||||___ R error rate
							|||____ S speed/performance
							||_____ O updated online
							|______ P prefailure warning

General Purpose Log Directory Version 1
SMART		   Log Directory Version 1 [multi-sector log support]
Address	Access  R/W   Size  Description
0x00	   GPL,SL  R/O	  1  Log Directory
0x01		   SL  R/O	  1  Summary SMART error log
0x02		   SL  R/O	  5  Comprehensive SMART error log
0x03	   GPL	 R/O	  6  Ext. Comprehensive SMART error log
0x06		   SL  R/O	  1  SMART self-test log
0x07	   GPL	 R/O	  1  Extended self-test log
0x09		   SL  R/W	  1  Selective self-test log
0x10	   GPL	 R/O	  1  SATA NCQ Queued Error log
0x11	   GPL	 R/O	  1  SATA Phy Event Counters log
0x21	   GPL	 R/O	  1  Write stream error log
0x22	   GPL	 R/O	  1  Read stream error log
0x80-0x9f  GPL,SL  R/W	 16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS	  16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS	   1  Device vendor specific log
0xbd	   GPL,SL  VS	   1  Device vendor specific log
0xc0	   GPL,SL  VS	   1  Device vendor specific log
0xc1	   GPL	 VS	  93  Device vendor specific log
0xe0	   GPL,SL  R/W	  1  SCT Command/Status
0xe1	   GPL,SL  R/W	  1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description	Status				  Remaining  LifeTime(hours)  LBA																															   _of_first_error
# 1  Short offline	   Completed without error	   00%	 18977		 -
# 2  Extended offline	Completed without error	   00%	 18890		 -
# 3  Short offline	   Completed without error	   00%	 18809		 -
# 4  Short offline	   Completed without error	   00%	 18641		 -
# 5  Extended offline	Completed without error	   00%	 18554		 -
# 6  Short offline	   Completed without error	   00%	 18473		 -
# 7  Short offline	   Completed without error	   00%	 18257		 -
# 8  Extended offline	Completed without error	   00%	 18170		 -
# 9  Short offline	   Completed without error	   00%	 18089		 -
#10  Short offline	   Completed without error	   00%	 17921		 -
#11  Extended offline	Completed without error	   00%	 17835		 -
#12  Short offline	   Completed without error	   00%	 17754		 -
#13  Short offline	   Completed without error	   00%	 17514		 -
#14  Extended offline	Completed without error	   00%	 17427		 -
#15  Short offline	   Completed without error	   00%	 17346		 -
#16  Short offline	   Completed without error	   00%	 17178		 -
#17  Extended offline	Completed without error	   00%	 17092		 -
#18  Short offline	   Completed without error	   00%	 17011		 -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:				  3
SCT Version (vendor specific):	   258 (0x0102)
SCT Support Level:				   1
Device State:						Active (0)
Current Temperature:					36 Celsius
Power Cycle Min/Max Temperature:	 22/41 Celsius
Lifetime	Min/Max Temperature:	  2/41 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:	 2
Temperature Sampling Period:		 1 minute
Temperature Logging Interval:		1 minute
Min/Max recommended Temperature:	  0/60 Celsius
Min/Max Temperature Limit:		   -41/85 Celsius
Temperature History Size (Index):	478 (163)

Index	Estimated Time   Temperature Celsius
 164	2017-07-26 09:46	37  ******************
 ...	..( 97 skipped).	..  ******************
 262	2017-07-26 11:24	37  ******************
 263	2017-07-26 11:25	38  *******************
 ...	..( 29 skipped).	..  *******************
 293	2017-07-26 11:55	38  *******************
 294	2017-07-26 11:56	37  ******************
 ...	..( 85 skipped).	..  ******************
 380	2017-07-26 13:22	37  ******************
 381	2017-07-26 13:23	36  *****************
 ...	..(252 skipped).	..  *****************
 156	2017-07-26 17:36	36  *****************
 157	2017-07-26 17:37	37  ******************
 ...	..(  5 skipped).	..  ******************
 163	2017-07-26 17:43	37  ******************

SCT Error Recovery Control:
		   Read:	 70 (7.0 seconds)
		  Write:	 70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID	  Size	 Value  Description
0x0001  2			0  Command failed due to ICRC error
0x0002  2			0  R_ERR response for data FIS
0x0003  2			0  R_ERR response for device-to-host data FIS
0x0004  2			0  R_ERR response for host-to-device data FIS
0x0005  2			0  R_ERR response for non-data FIS
0x0006  2			0  R_ERR response for device-to-host non-data FIS
0x0007  2			0  R_ERR response for host-to-device non-data FIS
0x0008  2			0  Device-to-host non-data FIS retries
0x0009  2		   21  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2		   21  Device-to-host register FISes sent due to a COMRESET
0x000b  2			0  CRC errors within host-to-device FIS
0x000f  2			0  R_ERR response for host-to-device data FIS, CRC
0x0012  2			0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4	  7587790  Vendor specific

 

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,176
Temperature is on the high side, but everything else looks good.
 

flyinfitz1

Explorer
Joined
Mar 29, 2013
Messages
91
And one year later it looks like all is well. Any thoughts?
Code:
=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Red
Device Model:	 WDC WD30EFRX-68EUZN0
Serial Number:	WD-WCC4NDRX32KS
LU WWN Device Id: 5 0014ee 20ad3a331
Firmware Version: 82.00A82
User Capacity:	3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:	 512 bytes logical, 4096 bytes physical
Rotation Rate:	5400 rpm
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Sun Aug 19 08:43:15 2018 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
										was never started.
										Auto Offline Data Collection: Disab
Self-test execution status:	  (   0) The previous self-test routine comp
										without error or no self-test has e
										been run.
Total time to complete Offline
data collection:				(39540) seconds.
Offline data collection
capabilities:					(0x7b) SMART execute Offline immediate.
										Auto Offline data collection on/offort.
										Suspend Offline collection upon new
										command.
										Offline surface scan supported.
										Self-test supported.
										Conveyance Self-test supported.
										Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
										power-saving mode.
										Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
										General Purpose Logging supported.
Short self-test routine
recommended polling time:		(   2) minutes.
Extended self-test routine
recommended polling time:		( 397) minutes.
Conveyance self-test routine
recommended polling time:		(   5) minutes.
SCT capabilities:			  (0x703d) SCT Status supported.
										SCT Error Recovery Control supporte
										SCT Feature Control supported.
										SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAGS	VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate	 POSR-K   200   200   051	-	0
  3 Spin_Up_Time			POS--K   181   176   021	-	5933
  4 Start_Stop_Count		-O--CK   100   100   000	-	113
  5 Reallocated_Sector_Ct   PO--CK   200   200   140	-	0
  7 Seek_Error_Rate		 -OSR-K   200   200   000	-	0
  9 Power_On_Hours		  -O--CK   062   062   000	-	28306
 10 Spin_Retry_Count		-O--CK   100   100   000	-	0
 11 Calibration_Retry_Count -O--CK   100   253   000	-	0
 12 Power_Cycle_Count	   -O--CK   100   100   000	-	82
192 Power-Off_Retract_Count -O--CK   200   200   000	-	25
193 Load_Cycle_Count		-O--CK   200   200   000	-	1681
194 Temperature_Celsius	 -O---K   115   109   000	-	35
196 Reallocated_Event_Count -O--CK   200   200   000	-	0
197 Current_Pending_Sector  -O--CK   200   200   000	-	0
198 Offline_Uncorrectable   ----CK   100   253   000	-	0
199 UDMA_CRC_Error_Count	-O--CK   200   200   000	-	0
200 Multi_Zone_Error_Rate   ---R--   200   200   000	-	0
							||||||_ K auto-keep
							|||||__ C event count
							||||___ R error rate
							|||____ S speed/performance
							||_____ O updated online
							|______ P prefailure warning

General Purpose Log Directory Version 1
SMART		   Log Directory Version 1 [multi-sector log support]
Address	Access  R/W   Size  Description
0x00	   GPL,SL  R/O	  1  Log Directory
0x01		   SL  R/O	  1  Summary SMART error log
0x02		   SL  R/O	  5  Comprehensive SMART error log
0x03	   GPL	 R/O	  6  Ext. Comprehensive SMART error log
0x06		   SL  R/O	  1  SMART self-test log
0x07	   GPL	 R/O	  1  Extended self-test log
0x09		   SL  R/W	  1  Selective self-test log
0x10	   GPL	 R/O	  1  NCQ Command Error log
0x11	   GPL	 R/O	  1  SATA Phy Event Counters log
0x21	   GPL	 R/O	  1  Write stream error log
0x22	   GPL	 R/O	  1  Read stream error log
0x80-0x9f  GPL,SL  R/W	 16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS	  16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS	   1  Device vendor specific log
0xbd	   GPL,SL  VS	   1  Device vendor specific log
0xc0	   GPL,SL  VS	   1  Device vendor specific log
0xc1	   GPL	 VS	  93  Device vendor specific log
0xe0	   GPL,SL  R/W	  1  SCT Command/Status
0xe1	   GPL,SL  R/W	  1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description	Status				  Remaining  LifeTime(hours)_of_first_error
# 1  Short offline	   Completed without error	   00%	 27725
# 2  Extended offline	Completed without error	   00%	 27639
# 3  Short offline	   Completed without error	   00%	 27557
# 4  Short offline	   Completed without error	   00%	 27390
# 5  Extended offline	Completed without error	   00%	 27303
# 6  Short offline	   Completed without error	   00%	 27222
# 7  Short offline	   Completed without error	   00%	 27006
# 8  Extended offline	Completed without error	   00%	 26919
# 9  Short offline	   Completed without error	   00%	 26838
#10  Short offline	   Completed without error	   00%	 26670
#11  Extended offline	Completed without error	   00%	 26584
#12  Short offline	   Completed without error	   00%	 26503
#13  Short offline	   Completed without error	   00%	 26263
#14  Extended offline	Completed without error	   00%	 26176
#15  Short offline	   Completed without error	   00%	 26095
#16  Short offline	   Completed without error	   00%	 25927
#17  Extended offline	Completed without error	   00%	 25841
#18  Short offline	   Completed without error	   00%	 25759

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:				  3
SCT Version (vendor specific):	   258 (0x0102)
SCT Support Level:				   1
Device State:						Active (0)
Current Temperature:					35 Celsius
Power Cycle Min/Max Temperature:	 34/36 Celsius
Lifetime	Min/Max Temperature:	  2/41 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:	 2
Temperature Sampling Period:		 1 minute
Temperature Logging Interval:		1 minute
Min/Max recommended Temperature:	  0/60 Celsius
Min/Max Temperature Limit:		   -41/85 Celsius
Temperature History Size (Index):	478 (363)

Index	Estimated Time   Temperature Celsius
 364	2018-08-19 00:46	35  ****************
 ...	..(292 skipped).	..  ****************
 179	2018-08-19 05:39	35  ****************
 180	2018-08-19 05:40	34  ***************
 ...	..(  9 skipped).	..  ***************
 190	2018-08-19 05:50	34  ***************
 191	2018-08-19 05:51	35  ****************
 ...	..(127 skipped).	..  ****************
 319	2018-08-19 07:59	35  ****************
 320	2018-08-19 08:00	36  *****************
 321	2018-08-19 08:01	36  *****************
 322	2018-08-19 08:02	36  *****************
 323	2018-08-19 08:03	35  ****************
 ...	..( 12 skipped).	..  ****************
 336	2018-08-19 08:16	35  ****************
 337	2018-08-19 08:17	36  *****************
 ...	..( 22 skipped).	..  *****************
 360	2018-08-19 08:40	36  *****************
 361	2018-08-19 08:41	35  ****************
 362	2018-08-19 08:42	35  ****************
 363	2018-08-19 08:43	35  ****************

SCT Error Recovery Control:
		   Read:	 70 (7.0 seconds)
		  Write:	 70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID	  Size	 Value  Description
0x0001  2			0  Command failed due to ICRC error
0x0002  2			0  R_ERR response for data FIS
0x0003  2			0  R_ERR response for device-to-host data FIS
0x0004  2			0  R_ERR response for host-to-device data FIS
0x0005  2			0  R_ERR response for non-data FIS
0x0006  2			0  R_ERR response for device-to-host non-data FIS
0x0007  2			0  R_ERR response for host-to-device non-data FIS
0x0008  2			0  Device-to-host non-data FIS retries
0x0009  2		   12  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2		   12  Device-to-host register FISes sent due to a COMRESE
0x000b  2			0  CRC errors within host-to-device FIS
0x000f  2			0  R_ERR response for host-to-device data FIS, CRC
0x0012  2			0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4		38307  Vendor specific

 

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,176
Everything seems fine.
 

flyinfitz1

Explorer
Joined
Mar 29, 2013
Messages
91
much appreciated. Since these have a 3 year warranty and Im at about 3 years of use, should I start replacing them?
 

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,176
Not unless they start failing.
 

DrKK

FreeNAS Generalissimo
Joined
Oct 15, 2013
Messages
3,630
Your drives are nearing 30000 hours. Every month a drive is in service, it's like a human aging one year. That's my rule of thumb. If you concur with the DrKK drive-life analysis: If this were a person, they'd be just about 40 years old. Just like a 40 year old person, if they've always taken care of themselves and there are no underlying issues, everything should be fine for quite some time. But also like a 40 year old person, if they've been drinking and smoking and eating hot pockets their whole life, then it's a crapshoot at 40.

Your drive shows that it's been cared for extremely well. In fact, the only thing not "awesome" is it's been run at a temperature near what I consider to be close to the cutoff on the high end.

There is over an 80% chance that your drive will last another 30000 hours, in my experience.

I concur with the Portuguese Grandmaster, @Ericloewe
 
Status
Not open for further replies.
Top