nothing
Explorer
- Joined
- Jun 4, 2023
- Messages
- 59
Found this status for my storage devices:
Ran a smart short test and a zfs scrub and after that, I got this:
Back online but still has errors.
Do I need to replace the drive? I tried figuring out this output but still not sure if i need to replace the drive or not.
Ran a smart short test and a zfs scrub and after that, I got this:
Back online but still has errors.
Do I need to replace the drive? I tried figuring out this output but still not sure if i need to replace the drive or not.
Code:
root@truenas[~]# smartctl -x /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.107+truenas] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Ultrastar DC HC550
Device Model: WDC WUH721816ALE6L4
Serial Number: XXXX
LU WWN Device Id: 5 000cca 295f34055
Firmware Version: PCGNW680
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-4 published, ANSI INCITS 529-2018
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Sep 3 05:25:55 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1910) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0
2 Throughput_Performance P-S--- 148 148 054 - 48
3 Spin_Up_Time POS--- 084 084 001 - 326 (Average 329)
4 Start_Stop_Count -O--C- 100 100 000 - 53
5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0
7 Seek_Error_Rate PO-R-- 100 100 001 - 0
8 Seek_Time_Performance P-S--- 140 140 020 - 15
9 Power_On_Hours -O--C- 100 100 000 - 2084
10 Spin_Retry_Count PO--C- 100 100 001 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 53
22 Helium_Level PO---K 100 100 025 - 100
192 Power-Off_Retract_Count -O--CK 100 100 000 - 151
193 Load_Cycle_Count -O--C- 100 100 000 - 151
194 Temperature_Celsius -O---- 044 044 000 - 48 (Min/Max 25/52)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 30001 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x2f GPL - 1 Set Sector Configuration
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb7 SL VS 1 Device vendor specific log
0xd8 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2084 -
# 2 Extended offline Completed without error 00% 1318 -
# 3 Short offline Completed without error 00% 1059 -
# 4 Short offline Completed without error 00% 1057 -
# 5 Extended offline Interrupted (host reset) 90% 750 -
# 6 Extended offline Completed without error 00% 594 -
# 7 Short offline Completed without error 00% 263 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: DST executing in background (3)
Current Temperature: 48 Celsius
Power Cycle Min/Max Temperature: 37/50 Celsius
Lifetime Min/Max Temperature: 25/52 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
Minimum supported ERC Time Limit: 65 (6.5 seconds)
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (93)
Index Estimated Time Temperature Celsius
94 2023-09-03 03:18 45 **************************
... ..( 5 skipped). .. **************************
100 2023-09-03 03:24 45 **************************
101 2023-09-03 03:25 46 ***************************
... ..( 23 skipped). .. ***************************
125 2023-09-03 03:49 46 ***************************
126 2023-09-03 03:50 47 ****************************
127 2023-09-03 03:51 47 ****************************
0 2023-09-03 03:52 47 ****************************
1 2023-09-03 03:53 46 ***************************
2 2023-09-03 03:54 47 ****************************
... ..( 67 skipped). .. ****************************
70 2023-09-03 05:02 47 ****************************
71 2023-09-03 05:03 48 *****************************
72 2023-09-03 05:04 47 ****************************
... ..( 17 skipped). .. ****************************
90 2023-09-03 05:22 47 ****************************
91 2023-09-03 05:23 48 *****************************
92 2023-09-03 05:24 48 *****************************
93 2023-09-03 05:25 45 **************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 53 --- Lifetime Power-On Resets
0x01 0x010 4 2084 --- Power-on Hours
0x01 0x018 6 32303496710 --- Logical Sectors Written
0x01 0x020 6 113170505 --- Number of Write Commands
0x01 0x028 6 52853402659 --- Logical Sectors Read
0x01 0x030 6 140469562 --- Number of Read Commands
0x01 0x038 6 7505125100 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 2082 --- Spindle Motor Power-on Hours
0x03 0x010 4 2082 --- Head Flying Hours
0x03 0x018 4 151 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 337 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 48 --- Current Temperature
0x05 0x010 1 45 N-- Average Short Term Temperature
0x05 0x018 1 46 N-- Average Long Term Temperature
0x05 0x020 1 52 --- Highest Temperature
0x05 0x028 1 25 --- Lowest Temperature
0x05 0x030 1 51 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 47 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 366 --- Number of Hardware Resets
0x06 0x010 4 115 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 15 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
Code:
root@truenas[~]# zpool status -v CHUNK
pool: CHUNK
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P
scan: resilvered 553M in 00:00:06 with 0 errors on Sun Sep 3 05:21:01 2023
config:
NAME STATE READ WRITE CKSUM
CHUNK ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
b776a493-8c25-4999-988a-5570ec8afa01 ONLINE 0 0 0
6415b76b-174e-48ae-9d72-4a0e1dc82ece ONLINE 0 0 0
6318b353-b38b-4914-be7a-8c99f90f6063 ONLINE 0 0 0
287a1658-b6a0-4c11-b486-10973def5afd ONLINE 0 0 0
c23400dc-e278-44ec-a9e9-66469271d111 ONLINE 0 0 1
errors: No known data errors
root@truenas[~]#
Last edited:
