nothing
Explorer
- Joined
- Jun 4, 2023
- Messages
- 59
Found this status for my storage devices:
Ran a smart short test and a zfs scrub and after that, I got this:
Back online but still has errors.
Do I need to replace the drive? I tried figuring out this output but still not sure if i need to replace the drive or not.
Ran a smart short test and a zfs scrub and after that, I got this:
Back online but still has errors.
Do I need to replace the drive? I tried figuring out this output but still not sure if i need to replace the drive or not.
Code:
root@truenas[~]# smartctl -x /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.107+truenas] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Ultrastar DC HC550 Device Model: WDC WUH721816ALE6L4 Serial Number: XXXX LU WWN Device Id: 5 000cca 295f34055 Firmware Version: PCGNW680 User Capacity: 16,000,900,661,248 bytes [16.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 published, ANSI INCITS 529-2018 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Sep 3 05:25:55 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 101) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1910) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0 2 Throughput_Performance P-S--- 148 148 054 - 48 3 Spin_Up_Time POS--- 084 084 001 - 326 (Average 329) 4 Start_Stop_Count -O--C- 100 100 000 - 53 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 7 Seek_Error_Rate PO-R-- 100 100 001 - 0 8 Seek_Time_Performance P-S--- 140 140 020 - 15 9 Power_On_Hours -O--C- 100 100 000 - 2084 10 Spin_Retry_Count PO--C- 100 100 001 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 53 22 Helium_Level PO---K 100 100 025 - 100 192 Power-Off_Retract_Count -O--CK 100 100 000 - 151 193 Load_Cycle_Count -O--C- 100 100 000 - 151 194 Temperature_Celsius -O---- 044 044 000 - 48 (Min/Max 25/52) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 255 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 30001 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x2f GPL - 1 Set Sector Configuration 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 SL VS 1 Device vendor specific log 0xd8 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2084 - # 2 Extended offline Completed without error 00% 1318 - # 3 Short offline Completed without error 00% 1059 - # 4 Short offline Completed without error 00% 1057 - # 5 Extended offline Interrupted (host reset) 90% 750 - # 6 Extended offline Completed without error 00% 594 - # 7 Short offline Completed without error 00% 263 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: DST executing in background (3) Current Temperature: 48 Celsius Power Cycle Min/Max Temperature: 37/50 Celsius Lifetime Min/Max Temperature: 25/52 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) Minimum supported ERC Time Limit: 65 (6.5 seconds) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (93) Index Estimated Time Temperature Celsius 94 2023-09-03 03:18 45 ************************** ... ..( 5 skipped). .. ************************** 100 2023-09-03 03:24 45 ************************** 101 2023-09-03 03:25 46 *************************** ... ..( 23 skipped). .. *************************** 125 2023-09-03 03:49 46 *************************** 126 2023-09-03 03:50 47 **************************** 127 2023-09-03 03:51 47 **************************** 0 2023-09-03 03:52 47 **************************** 1 2023-09-03 03:53 46 *************************** 2 2023-09-03 03:54 47 **************************** ... ..( 67 skipped). .. **************************** 70 2023-09-03 05:02 47 **************************** 71 2023-09-03 05:03 48 ***************************** 72 2023-09-03 05:04 47 **************************** ... ..( 17 skipped). .. **************************** 90 2023-09-03 05:22 47 **************************** 91 2023-09-03 05:23 48 ***************************** 92 2023-09-03 05:24 48 ***************************** 93 2023-09-03 05:25 45 ************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 53 --- Lifetime Power-On Resets 0x01 0x010 4 2084 --- Power-on Hours 0x01 0x018 6 32303496710 --- Logical Sectors Written 0x01 0x020 6 113170505 --- Number of Write Commands 0x01 0x028 6 52853402659 --- Logical Sectors Read 0x01 0x030 6 140469562 --- Number of Read Commands 0x01 0x038 6 7505125100 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2082 --- Spindle Motor Power-on Hours 0x03 0x010 4 2082 --- Head Flying Hours 0x03 0x018 4 151 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 337 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 48 --- Current Temperature 0x05 0x010 1 45 N-- Average Short Term Temperature 0x05 0x018 1 46 N-- Average Long Term Temperature 0x05 0x020 1 52 --- Highest Temperature 0x05 0x028 1 25 --- Lowest Temperature 0x05 0x030 1 51 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 47 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 366 --- Number of Hardware Resets 0x06 0x010 4 115 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 15 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS
Code:
root@truenas[~]# zpool status -v CHUNK pool: CHUNK state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P scan: resilvered 553M in 00:00:06 with 0 errors on Sun Sep 3 05:21:01 2023 config: NAME STATE READ WRITE CKSUM CHUNK ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 b776a493-8c25-4999-988a-5570ec8afa01 ONLINE 0 0 0 6415b76b-174e-48ae-9d72-4a0e1dc82ece ONLINE 0 0 0 6318b353-b38b-4914-be7a-8c99f90f6063 ONLINE 0 0 0 287a1658-b6a0-4c11-b486-10973def5afd ONLINE 0 0 0 c23400dc-e278-44ec-a9e9-66469271d111 ONLINE 0 0 1 errors: No known data errors root@truenas[~]#
Last edited: