Hi all,
I'm running a 6x2TB raidz2 on freenas 9.10, and had a drive fail by just disconnecting overnight. Now my pool is in a degraded state. I'm trying to follow the instructions to replace a failed drive, but the guide outlines a process to offline and then disconnect a failed drive. Since I cannot get the failed drive to connect, I'm a little unsure how to proceed.
The output of zpool status is:
Shell
NAME STATE READ WRITE CKSUM
Rosetta DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 0
gptid/7a173b25-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
gptid/7a61c46e-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
gptid/7aa29598-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
gptid/7ae0c5ee-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
gptid/7b1e2489-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
7220073043651036793 UNAVAIL 0 0 0 was /dev/gptid/7b5aac75-2fb0-11e4-a5f0-d05099273
f90
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0h19m with 0 errors on Tue Aug 15 04:04:43 2017
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da0p2 ONLINE 0 0 0
errors: No known data errors
======
Do I simply plug in a new drive in the place of the failed one and continue from step 3 of 8.1.10 Replacing a failed drive?
Thanks for your help.
I'm running a 6x2TB raidz2 on freenas 9.10, and had a drive fail by just disconnecting overnight. Now my pool is in a degraded state. I'm trying to follow the instructions to replace a failed drive, but the guide outlines a process to offline and then disconnect a failed drive. Since I cannot get the failed drive to connect, I'm a little unsure how to proceed.
The output of zpool status is:
Shell
NAME STATE READ WRITE CKSUM
Rosetta DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 0
gptid/7a173b25-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
gptid/7a61c46e-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
gptid/7aa29598-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
gptid/7ae0c5ee-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
gptid/7b1e2489-2fb0-11e4-a5f0-d05099273f90 ONLINE 0 0 0
7220073043651036793 UNAVAIL 0 0 0 was /dev/gptid/7b5aac75-2fb0-11e4-a5f0-d05099273
f90
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0h19m with 0 errors on Tue Aug 15 04:04:43 2017
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da0p2 ONLINE 0 0 0
errors: No known data errors
======
Do I simply plug in a new drive in the place of the failed one and continue from step 3 of 8.1.10 Replacing a failed drive?
Thanks for your help.