Help Analysis SMART test

Status
Not open for further replies.

Soloam

Contributor
Joined
Feb 14, 2014
Messages
196
I've been getting errors from a drive, can any one help me analise it? What should I look at when looking at a SMART test? Please advise and if possible explain what should I look for on this test to anticipate this problems.

Code:
root@freenas:~ # smartctl /dev/da1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

ATA device successfully opened

Use 'smartctl -a' (or '-x') to print SMART (and more) information

root@freenas:~ # clear
root@freenas:~ # smartctl -a /dev/da1  
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Red
Device Model:	 WDC WD20EFRX-68EUZN0
Serial Number:	WD-WCC4M6NJ37C0
LU WWN Device Id: 5 0014ee 261ea1d81
Firmware Version: 82.00A82
User Capacity:	2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:	 512 bytes logical, 4096 bytes physical
Rotation Rate:	5400 rpm
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Fri Apr 20 20:28:08 2018 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
										was never started.
										Auto Offline Data Collection: Disabled.
Self-test execution status:	  (   0) The previous self-test routine completed
										without error or no self-test has ever 
										been run.
Total time to complete Offline 
data collection:				(25980) seconds.
Offline data collection
capabilities:					(0x7b) SMART execute Offline immediate.
										Auto Offline data collection on/off support.
										Suspend Offline collection upon new
										command.
										Offline surface scan supported.
										Self-test supported.
										Conveyance Self-test supported.
										Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
										power-saving mode.
										Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
										General Purpose Logging supported.
Short self-test routine 
recommended polling time:		(   2) minutes.
Extended self-test routine
recommended polling time:		( 263) minutes.
Conveyance self-test routine
recommended polling time:		(   5) minutes.
SCT capabilities:			  (0x703d) SCT Status supported.
										SCT Error Recovery Control supported.
										SCT Feature Control supported.
										SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate	 0x002f   198   198   051	Pre-fail  Always	   -	   91345
 3 Spin_Up_Time			0x0027   175   175   021	Pre-fail  Always	   -	   4208
 4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   67
 5 Reallocated_Sector_Ct   0x0033   184   184   140	Pre-fail  Always	   -	   481
 7 Seek_Error_Rate		 0x002e   200   200   000	Old_age   Always	   -	   0
 9 Power_On_Hours		  0x0032   078   078   000	Old_age   Always	   -	   16732
10 Spin_Retry_Count		0x0032   100   253   000	Old_age   Always	   -	   0
11 Calibration_Retry_Count 0x0032   100   253   000	Old_age   Always	   -	   0
12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   67
192 Power-Off_Retract_Count 0x0032   200   200   000	Old_age   Always	   -	   65
193 Load_Cycle_Count		0x0032   200   200   000	Old_age   Always	   -	   641
194 Temperature_Celsius	 0x0022   106   096   000	Old_age   Always	   -	   41
196 Reallocated_Event_Count 0x0032   001   001   000	Old_age   Always	   -	   327
197 Current_Pending_Sector  0x0032   200   200   000	Old_age   Always	   -	   15
198 Offline_Uncorrectable   0x0030   100   253   000	Old_age   Offline	  -	   0
199 UDMA_CRC_Error_Count	0x0032   200   200   000	Old_age   Always	   -	   0
200 Multi_Zone_Error_Rate   0x0008   200   199   000	Old_age   Offline	  -	   10

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description	Status				  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline	   Completed without error	   00%	 16696		 -
# 2  Short offline	   Completed without error	   00%	 16528		 -
# 3  Extended offline	Completed: read failure	   90%	 16432		 298136
# 4  Short offline	   Completed without error	   00%	 16357		 -
# 5  Short offline	   Completed without error	   00%	 16123		 -
# 6  Extended offline	Completed: read failure	   80%	 16025		 27490176
# 7  Short offline	   Completed without error	   00%	 15952		 -
# 8  Short offline	   Completed without error	   00%	 15782		 -
# 9  Short offline	   Completed without error	   00%	 15616		 -
#10  Short offline	   Completed without error	   00%	 15451		 -
#11  Extended offline	Completed without error	   00%	 15357		 -
#12  Short offline	   Completed without error	   00%	 15280		 -
#13  Short offline	   Completed without error	   00%	 15112		 -
#14  Extended offline	Completed without error	   00%	 15023		 -
#15  Short offline	   Completed without error	   00%	 14949		 -
#16  Short offline	   Completed without error	   00%	 14708		 -
#17  Extended offline	Completed: read failure	   90%	 14609		 72814392
#18  Short offline	   Completed without error	   00%	 14382		 -
#19  Extended offline	Completed without error	   00%	 14293		 -
#20  Short offline	   Completed without error	   00%	 14214		 -
#21  Short offline	   Completed without error	   00%	 13976		 -
1 of 3 failed self-tests are outdated by newer successful extended offline self-test #11

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Thank You
 
Last edited:

Soloam

Contributor
Joined
Feb 14, 2014
Messages
196
:oops::oops::oops::oops::oops: I have to improve my search techniques... I swear I search for this...

Thank you... RMA on the way...
 

Soloam

Contributor
Joined
Feb 14, 2014
Messages
196
I've been noticing my system super slow can it be related with the hdd failing? I'll get a new drive first thing in the morning... I'll also send this one to RMA. Just to be safe
 

Jailer

Not strong, but bad
Joined
Sep 12, 2014
Messages
4,977
Status
Not open for further replies.
Top