HDD on the way out?

[rustydreamcast]

logged in today to see some critical errors on my box

running smartctl -a /dev/ada0 shows this below

I’m tending to think replace the drive now even though the volume manager says the mirror is online and healthy

Code:

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate	 0x002f   200   200   051	Pre-fail  Always	   -	   22
  3 Spin_Up_Time			0x0027   189   178   021	Pre-fail  Always	   -	   7533
  4 Start_Stop_Count		0x0032   100   100   000	Old_age   Always	   -	   80
  5 Reallocated_Sector_Ct   0x0033   164   164   140	Pre-fail  Always	   -	   1070
  7 Seek_Error_Rate		 0x002e   200   200   000	Old_age   Always	   -	   0
  9 Power_On_Hours		  0x0032   072   072   000	Old_age   Always	   -	   20671
 10 Spin_Retry_Count		0x0032   100   253   000	Old_age   Always	   -	   0
 11 Calibration_Retry_Count 0x0032   100   253   000	Old_age   Always	   -	   0
 12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   80
192 Power-Off_Retract_Count 0x0032   200   200   000	Old_age   Always	   -	   57
193 Load_Cycle_Count		0x0032   109   109   000	Old_age   Always	   -	   275614
194 Temperature_Celsius	 0x0022   120   112   000	Old_age   Always	   -	   32
196 Reallocated_Event_Count 0x0032   107   107   000	Old_age   Always	   -	   93
197 Current_Pending_Sector  0x0032   200   199   000	Old_age   Always	   -	   44
198 Offline_Uncorrectable   0x0030   199   199   000	Old_age   Offline	  -	   489
199 UDMA_CRC_Error_Count	0x0032   200   200   000	Old_age   Always	   -	   0
200 Multi_Zone_Error_Rate   0x0008   182   182   000	Old_age   Offline	  -	   6404

 

[rs225]

That drive is in bad shape. If you have extra bays/ports, I would upgrade that mirror to a 3-way mirror, then get rid of the failing drive. Do you have scrub and SMART tests scheduled to run automatically and email you on failure?

Your load cycle count is high, so if you have other drives of the same model, they may need WDIDLE3 to be run.

 

[rustydreamcast]

I've just ordered a new 3Tb drive to replace this one I do have extra slots they are not hot swap was doing to replace the drive on arrival its a home box so outage is not a problem :)

I rebuilt the system drive and replaced the failing USB with an SSD about 2 months ago and stupidly did not re add the email on fail back into the config

thanks for the tip re WDIDLE3