- Joined
- May 28, 2011
- Messages
- 10,996
I have seen a few requests in the not so distant past where people are looking to build a system and have been asking about the high temps of many of the HBAs and looking for data on those HBAs such as temps of the heatsink and then throughput. I would think the throughput data could be retrived from the manufacturers website and these folks could do some legwork to figure this out however the temps need some real use data.
So I thought I'd start a thread which would ask for volunteers to provide some data, and any other data you feel shoudl be provided:
1) Make/Model of HBA
2) How many drives are connected to the HBA
3) Idle Temp of Heastsink
4) Scrub (or heavy use) Temp of Heatsink
5) Any specifics on active airflow across the heatsink during the readings or if there is an adjacent card next to the HBA restricting good airflow.
Cheers,
-Mark
So I thought I'd start a thread which would ask for volunteers to provide some data, and any other data you feel shoudl be provided:
1) Make/Model of HBA
2) How many drives are connected to the HBA
3) Idle Temp of Heastsink
4) Scrub (or heavy use) Temp of Heatsink
5) Any specifics on active airflow across the heatsink during the readings or if there is an adjacent card next to the HBA restricting good airflow.
Cheers,
-Mark