My daily status reports have begun notifying me of this:
But it also contains this:
And I get this from the terminal:
So too me it looks like the zpool is okay, but I still got that feeling in the bakc of my head that something is up.
I am thinking I should replace the disk (Just need to verify the steps first...) - What do you guys say? Is the disk dying (It still under warranty as it's a WD Black disk)?
Please post if you need me to run a few other commands.
Code:
Checking status of 3ware RAID controllers: Controller c0: Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 JBOD OK - - - 1863.02 Ri OFF u1 JBOD OK - - - 1863.02 Ri OFF u2 JBOD OK - - - 1863.02 Ri OFF u3 JBOD OK - - - 1863.02 Ri OFF u4 JBOD OK - - - 1863.02 Ri OFF u5 JBOD OK - - - 1863.02 Ri OFF VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 1.82 TB SATA 0 - WDC WD2002FYPS-02W3 p1 OK u1 1.82 TB SATA 1 - WDC WD2002FYPS-01U1 p2 OK u2 1.82 TB SATA 2 - WDC WD2002FYPS-01U1 p3 OK u3 1.82 TB SATA 3 - WDC WD2002FYPS-01U1 p4 ECC-ERROR u4 1.82 TB SATA 4 - WDC WD2002FYPS-02W3 p5 OK u5 1.82 TB SATA 5 - WDC WD2002FYPS-01U1
But it also contains this:
Code:
Checking status of zfs pools: NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT vol1 10.9T 1.52T 9.35T 14% 1.00x ONLINE /mnt all pools are healthy
And I get this from the terminal:
Code:
[root@freenas ~]# zpool status pool: vol1 state: ONLINE status: The pool is formatted using a legacy on-disk format. The pool can still be used, but some features are unavailable. action: Upgrade the pool using 'zpool upgrade'. Once this is done, the pool will no longer be accessible on software that does not support feature flags. scan: scrub repaired 0 in 1h59m with 0 errors on Thu Nov 14 01:59:25 2013 config: NAME STATE READ WRITE CKSUM vol1 ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/95c26382-f2b7-11e2-b96a-0025900055f4 ONLINE 0 0 0 gptid/972b1579-f2b7-11e2-b96a-0025900055f4 ONLINE 0 0 0 gptid/97db458f-f2b7-11e2-b96a-0025900055f4 ONLINE 0 0 0 gptid/988db300-f2b7-11e2-b96a-0025900055f4 ONLINE 0 0 0 gptid/992f1bc8-f2b7-11e2-b96a-0025900055f4 ONLINE 0 0 0 gptid/99e0953d-f2b7-11e2-b96a-0025900055f4 ONLINE 0 0 0 errors: No known data errors
So too me it looks like the zpool is okay, but I still got that feeling in the bakc of my head that something is up.
I am thinking I should replace the disk (Just need to verify the steps first...) - What do you guys say? Is the disk dying (It still under warranty as it's a WD Black disk)?
Please post if you need me to run a few other commands.