PCarter2022
Cadet
- Joined
- Dec 29, 2021
- Messages
- 2
I have read /looked thru several other posts concerning no-IP but none of them seem to address what I am experiencing.
- My MiniXL+ system was previously connecting, had CORE 12 U7 running.
- I decided I wanted to try SCALE. I installed via USB stick.
- Install went fine
- Admin GUI not avail - no IP assigned from DHCP, no typical link lights
- remote admin Ethernet port seems to give Link Lights, but not onboard anymore
- literally nothing changed or moved, only the install attempt.
- I did not do anything other than default on the install, so whatever either CORE or SCALE do as a default install is all that was chosen
I have done the following:
- reinstalled CORE, same behavior
- reinstalled SCALE, same behavior
- changed Ethernet cabling
- confirmed Ethernet connectivity with another device (laptop)
- tried other Ethernet port on MiniXL with either ethernet cabling
- attempted manual IP, no connectivity
- loaded 'default configuration' in BIOS
- power cycled system (unplugged from wall and discharged)
I feel like I am somehow missing something basic on the overall install. Otherwise I would see link lights? I see them try to blink every so often but they never show as what would look 'normal' for link lights.
What am I missing?
Thanks in advance
- My MiniXL+ system was previously connecting, had CORE 12 U7 running.
- I decided I wanted to try SCALE. I installed via USB stick.
- Install went fine
- Admin GUI not avail - no IP assigned from DHCP, no typical link lights
- remote admin Ethernet port seems to give Link Lights, but not onboard anymore
- literally nothing changed or moved, only the install attempt.
- I did not do anything other than default on the install, so whatever either CORE or SCALE do as a default install is all that was chosen
I have done the following:
- reinstalled CORE, same behavior
- reinstalled SCALE, same behavior
- changed Ethernet cabling
- confirmed Ethernet connectivity with another device (laptop)
- tried other Ethernet port on MiniXL with either ethernet cabling
- attempted manual IP, no connectivity
- loaded 'default configuration' in BIOS
- power cycled system (unplugged from wall and discharged)
I feel like I am somehow missing something basic on the overall install. Otherwise I would see link lights? I see them try to blink every so often but they never show as what would look 'normal' for link lights.
What am I missing?
Thanks in advance