Bruno Matias
Cadet
- Joined
- Jun 5, 2016
- Messages
- 8
Hi,
I have a HP Proliant ML110 G5 with two 250GB hard disks, and a 8GB pen drive on the internal usb port, on which i installed the FreeNas.
I'm having a problem on creating the volume. I fill the information required, and when i press the button to create the volume, it open a window with the steps it's going to do, and end right after the step of creating the volume, without creating any volume.
I checked with gpart and with zpool and the volume isn't created.
I also checked in /dev/ and the devices (ada0 and ada1) are there.
So, what can it be the problem on creating the volume?
Thanks a lot.
BM
I have a HP Proliant ML110 G5 with two 250GB hard disks, and a 8GB pen drive on the internal usb port, on which i installed the FreeNas.
I'm having a problem on creating the volume. I fill the information required, and when i press the button to create the volume, it open a window with the steps it's going to do, and end right after the step of creating the volume, without creating any volume.
I checked with gpart and with zpool and the volume isn't created.
I also checked in /dev/ and the devices (ada0 and ada1) are there.
So, what can it be the problem on creating the volume?
Thanks a lot.
BM