SOLVED freeNas network setup

[kbrvfx]

Hello everyone!

The current project that I am working on is a freenas server that can be accessed by both wireless and lan, however our countries isp is greedy thus only having 1 gigabit lan port working on the default router. Will this network setup of mine work?

Default Isp Router -> Asus RT-AC53 -> TP-Link TL-SG108 -> <- Freenas server/pc's

or will this be better?

Default ISP Router -> TP-Link TL-SG108 <- Freenas server/pc's

With the second set-up, would i be able to access the server wireless and through lan? Do I really need a secondary router connecting to the ISP router? I really don't have any clue here.
Thank you so much

 

[ThreeDee]

unless your ISP's router has wireless built into it .. you will need your own wireless router for your wireless devices to access your network

 

[kbrvfx]

unless your ISP's router has wireless built into it .. you will need your own wireless router for your wireless devices to access your network

In short, I could still access my server (connected to switch) by wifi through my isp’s router, am i right?

 

[ThreeDee]

anything on your network should see your server just fine

 

[Dan Tudora]

hello
Default ISP Router -> TP-Link TL-SG108 <- Freenas server/pc's
Asus RT-AC53 -> TP-Link TL-SG108
I mean everything in switch
Asus RT-AC53 can/must be set in Access Point mode to have 1 network wired/wireless
after that all your device can comunicate