Hello All,
I am having an issue after installing update base-os-9.3.1-STABLE-42a76e8-dc0354b-6b89ca8. The upgrade processes OK, and reboots. During the bootup phase, it panics and boot loops. Rolling back the update and selecting a previous boot environment works fine. Here is my hardware config:
USB Boot: SanDisk Cruzer Fit CZ33 16GB USB 2.0 Low-Profile Flash Drive- SDCZ33-016G-B35
Mobo/CPU: ASRock Intel Avoton C2750 2.4GHz/DDR3/SATA3/V&2GbE/Mini-ITX Motherboard and CPU Combo C2750D4I
Memory: 32GB DDR3/DDR3L-1600MT/s (PC3-12800) DR x8 ECC UDIMMs
Hard Drives: 6x3TB RAIDZ1, 2x120GB SSD l2arc/zil
I have scrubbed the USB, my dataset, and deleted all previous boot environments (other then my current
base-os-9.3.1-STABLE-e3dfc97-93c5885-6b89ca8). Nothing really seems to work so far.
No BIOS updates are available for the board either.
I have attached a screenshot from the IPMI video I took while it attempts to boot. Any help would be greatly appreciated.
I am having an issue after installing update base-os-9.3.1-STABLE-42a76e8-dc0354b-6b89ca8. The upgrade processes OK, and reboots. During the bootup phase, it panics and boot loops. Rolling back the update and selecting a previous boot environment works fine. Here is my hardware config:
USB Boot: SanDisk Cruzer Fit CZ33 16GB USB 2.0 Low-Profile Flash Drive- SDCZ33-016G-B35
Mobo/CPU: ASRock Intel Avoton C2750 2.4GHz/DDR3/SATA3/V&2GbE/Mini-ITX Motherboard and CPU Combo C2750D4I
Memory: 32GB DDR3/DDR3L-1600MT/s (PC3-12800) DR x8 ECC UDIMMs
Hard Drives: 6x3TB RAIDZ1, 2x120GB SSD l2arc/zil
I have scrubbed the USB, my dataset, and deleted all previous boot environments (other then my current
base-os-9.3.1-STABLE-e3dfc97-93c5885-6b89ca8). Nothing really seems to work so far.
No BIOS updates are available for the board either.
I have attached a screenshot from the IPMI video I took while it attempts to boot. Any help would be greatly appreciated.