Hostname freenas.local
Build FreeNAS-8.2-r8891-amd64
Platform AMD Phenom(tm) II X4 B55 Processor
Memory 4049MB
System Time Fri Dec 02 13:50:38 PST 2011
Uptime 1:50PM up 3:25, 1 user
Load Average 0.00, 0.00, 0.00
Good night, people did according to the configuration documentation. But my targets do not appear in Windows 2008 R2 so that I can connect.
istgt.conf:
[root@freenas] ~# cat /usr/local/etc/istgt/istgt.conf
# Global section
[Global]
NodeBase "iqn.2011-03.local.freenas"
PidFile "/var/run/istgt.pid"
AuthFile "/usr/local/etc/istgt/auth.conf"
MediaDirectory /mnt
Timeout 30
NopInInterval 20
MaxR2T 32
DiscoveryAuthMethod Auto
DiscoveryAuthGroup AuthGroup1
MaxSessions 16
MaxConnections 8
FirstBurstLength 65536
MaxBurstLength 262144
MaxRecvDataSegmentLength 262144
MaxOutstandingR2T 16
DefaultTime2Wait 2
DefaultTime2Retain 60
[UnitControl]
# PortalGroup section
[PortalGroup1]
Portal DA1 0.0.0.0:3260
# InitiatorGroup section
[InitiatorGroup1]
InitiatorName "ALL"
Netmask ALL
# LogicalUnit section
Log below:
Dec 2 13:24:28 freenas notifier[2414]: Executing: /usr/sbin/service ix-istgt quietstart
Dec 2 13:24:28 freenas notifier: iscsi_target_auth_user iscsi_target_auth_secret iscsi_target_auth_peeruser iscsi_target_auth_peersecret: not found
Dec 2 13:24:28 freenas notifier: read: arg count
Dec 2 13:24:28 freenas notifier[2414]: Executing: /usr/sbin/service istgt forcestop
Dec 2 13:24:28 freenas notifier: Stopping istgt.
Dec 2 13:24:28 freenas istgt[21971]: istgt version 0.4 (20111008) exiting
Dec 2 13:24:28 freenas notifier: Waiting for PIDS: 21971.
Dec 2 13:24:28 freenas notifier[2414]: Executing: /usr/sbin/service istgt restart
Dec 2 13:24:28 freenas notifier: istgt not running? (check /var/run/istgt.pid).
Dec 2 13:24:28 freenas notifier: Starting istgt.
Dec 2 13:24:28 freenas notifier: istgt version 0.4 (20111008)
Dec 2 13:24:28 freenas istgt[22271]: istgt version 0.4 (20111008)
Dec 2 13:24:28 freenas istgt[22271]: normal mode
Dec 2 13:24:28 freenas notifier: normal mode
Dec 2 13:24:29 freenas notifier[2414]: Executing: /bin/pgrep -F /var/run/istgt.pid istgt
Dec 2 13:24:29 freenas middleware[2414]: Popen()ing: /sbin/zfs list -Hr -t filesystem vol01
Dec 2 13:45:19 freenas istgt[22272]: Login(discovery) from initiator (10.0.0.175) on (10.0.0.94:3260,1), ISID=400001370000, TSIH=1, CID=1, HeaderDigest=off, DataDigest=off
Dec 2 13:45:19 freenas istgt[22272]: Logout(discovery) from initiator (10.0.0.175) on (10.0.0.94:3260,1), ISID=400001370000, TSIH=1, CID=1, HeaderDigest=off, DataDigest=off
Windows Logs, and information.
When i make a Quick Connection with "Initiator Iscsi Microsoft", show this information:
No Targets available for Login using Quick Connect.
Build FreeNAS-8.2-r8891-amd64
Platform AMD Phenom(tm) II X4 B55 Processor
Memory 4049MB
System Time Fri Dec 02 13:50:38 PST 2011
Uptime 1:50PM up 3:25, 1 user
Load Average 0.00, 0.00, 0.00
Good night, people did according to the configuration documentation. But my targets do not appear in Windows 2008 R2 so that I can connect.
istgt.conf:
[root@freenas] ~# cat /usr/local/etc/istgt/istgt.conf
# Global section
[Global]
NodeBase "iqn.2011-03.local.freenas"
PidFile "/var/run/istgt.pid"
AuthFile "/usr/local/etc/istgt/auth.conf"
MediaDirectory /mnt
Timeout 30
NopInInterval 20
MaxR2T 32
DiscoveryAuthMethod Auto
DiscoveryAuthGroup AuthGroup1
MaxSessions 16
MaxConnections 8
FirstBurstLength 65536
MaxBurstLength 262144
MaxRecvDataSegmentLength 262144
MaxOutstandingR2T 16
DefaultTime2Wait 2
DefaultTime2Retain 60
[UnitControl]
# PortalGroup section
[PortalGroup1]
Portal DA1 0.0.0.0:3260
# InitiatorGroup section
[InitiatorGroup1]
InitiatorName "ALL"
Netmask ALL
# LogicalUnit section
Log below:
Dec 2 13:24:28 freenas notifier[2414]: Executing: /usr/sbin/service ix-istgt quietstart
Dec 2 13:24:28 freenas notifier: iscsi_target_auth_user iscsi_target_auth_secret iscsi_target_auth_peeruser iscsi_target_auth_peersecret: not found
Dec 2 13:24:28 freenas notifier: read: arg count
Dec 2 13:24:28 freenas notifier[2414]: Executing: /usr/sbin/service istgt forcestop
Dec 2 13:24:28 freenas notifier: Stopping istgt.
Dec 2 13:24:28 freenas istgt[21971]: istgt version 0.4 (20111008) exiting
Dec 2 13:24:28 freenas notifier: Waiting for PIDS: 21971.
Dec 2 13:24:28 freenas notifier[2414]: Executing: /usr/sbin/service istgt restart
Dec 2 13:24:28 freenas notifier: istgt not running? (check /var/run/istgt.pid).
Dec 2 13:24:28 freenas notifier: Starting istgt.
Dec 2 13:24:28 freenas notifier: istgt version 0.4 (20111008)
Dec 2 13:24:28 freenas istgt[22271]: istgt version 0.4 (20111008)
Dec 2 13:24:28 freenas istgt[22271]: normal mode
Dec 2 13:24:28 freenas notifier: normal mode
Dec 2 13:24:29 freenas notifier[2414]: Executing: /bin/pgrep -F /var/run/istgt.pid istgt
Dec 2 13:24:29 freenas middleware[2414]: Popen()ing: /sbin/zfs list -Hr -t filesystem vol01
Dec 2 13:45:19 freenas istgt[22272]: Login(discovery) from initiator (10.0.0.175) on (10.0.0.94:3260,1), ISID=400001370000, TSIH=1, CID=1, HeaderDigest=off, DataDigest=off
Dec 2 13:45:19 freenas istgt[22272]: Logout(discovery) from initiator (10.0.0.175) on (10.0.0.94:3260,1), ISID=400001370000, TSIH=1, CID=1, HeaderDigest=off, DataDigest=off
Windows Logs, and information.
When i make a Quick Connection with "Initiator Iscsi Microsoft", show this information:
No Targets available for Login using Quick Connect.
