Freenas 11.2 does not boot after update from 9.3

[Deleted member 95366]

Hello community,

First my Hardware Config:
CELSIUS W370 [YKJR046276]
8GB RAM
Intel Core 2 Duo E8400 3GHz / 1333Mhz

MainboardMainboard type D2817
Formfactor BTX
Chipset Intel® Q45 Express, Intel® 82801JO ICH10DO
Chipset notes Intel® vPro™ technology dependent on processor type
Processor socket LGA 775
Processor quantity maximum 1
Memory slots 4 DIMM (DDR2)
Supported capacity RAM (max.) 16 GB
Memory frequency 800 MHz
Memory notes In configurations with 4 GB and more the visible memory may be reduced to approximately 3.5 GB or less (for 32-bit operating systems) and configurations with 8 GB the visible memory may be reduced to approximately 7.5 GB or less (depending on system configuration).
LAN Built-in 10/100/1000 MBit/s Intel® 82567LM
Audio codec Realtek ALC663
Audio features 5.1 surround sound, High Definition audio, Internal speaker supports audio playback

I was running freenas - FreeNAS-9.3-STABLE on a 8GB USB Stick for many years successfully on the system.

Then I was doing a dumb move:
I made an upgrade to FreeNAS 11.2 without making a backup of my configuration.
The update was successfuly and I was able to access the webinterface with 11.2
But then I shutdown the PC and now it does not boot anymore.

Do you have any ideas how to get it running again?
Is my Hardware compatible to FreeNAS 11.2?

 

[dlavigne]

Were you able to resolve this?

If not, have you tried a fresh install to a new USB stick? It is possible that the original one failed.