From eBay, IBM Lenovo ServeRAID M1210. It said it was flashed to IT mode. However, this is in the dmesg:
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd
mrsas0: <AVAGO Fury SAS Controller> irq 41 at device 0.0 numa-domain 0 on pci10
mrsas0: Waiting for FW to come to ready state
mrsas0: FW now in Ready state
mrsas0: Using MSI-X with 2 number of vectors
mrsas0: FW supports <96> MSIX vector,Online CPU 2 Current MSIX <2>
mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x1e0,sc->request_alloc_sz 0x778, sc->reply_alloc_sz 0xf00,sc->io_frames_alloc_sz 0xf100
mrsas0: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0xef sc->chain_frames_alloc_sz: 0x3bc00
mrsas0: Issuing IOC INIT command to FW.
mrsas0: IOC Init failed, status = 0x3
mrsas0: Adapter initialize Fail.
device_attach: mrsas0 attach returned 6
mrsas0: <AVAGO Fury SAS Controller> mem 0xe0100000-0xe010ffff irq 41 at device 0.0 numa-domain 0 on pci10
mrsas0: Waiting for FW to come to ready state
mrsas0: FW is in FAULT state!!
device_attach: mrsas0 attach returned 6
All the research suggests that this is a firmware issue and it needs to be re-flashed.
Downloaded the firmware from here: https://www.broadcom.com/support/do...=MegaRAID+SAS+9341-4i&pa=&po=&dk=&pl=&l=false
Tried to flash with: SAS3FLSH.EXE -0 -f SAS930~1.BIN
No Avago SAS adapters found! Limited Command Set Available!
My thought is there is a process that you need to go through to cross flash this card. I am really stuck here. Is it documented somewhere how to flash this card? Could someone provide a link or something or tell me how to make this work. Thanks!
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd
mrsas0: <AVAGO Fury SAS Controller> irq 41 at device 0.0 numa-domain 0 on pci10
mrsas0: Waiting for FW to come to ready state
mrsas0: FW now in Ready state
mrsas0: Using MSI-X with 2 number of vectors
mrsas0: FW supports <96> MSIX vector,Online CPU 2 Current MSIX <2>
mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x1e0,sc->request_alloc_sz 0x778, sc->reply_alloc_sz 0xf00,sc->io_frames_alloc_sz 0xf100
mrsas0: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0xef sc->chain_frames_alloc_sz: 0x3bc00
mrsas0: Issuing IOC INIT command to FW.
mrsas0: IOC Init failed, status = 0x3
mrsas0: Adapter initialize Fail.
device_attach: mrsas0 attach returned 6
mrsas0: <AVAGO Fury SAS Controller> mem 0xe0100000-0xe010ffff irq 41 at device 0.0 numa-domain 0 on pci10
mrsas0: Waiting for FW to come to ready state
mrsas0: FW is in FAULT state!!
device_attach: mrsas0 attach returned 6
All the research suggests that this is a firmware issue and it needs to be re-flashed.
Downloaded the firmware from here: https://www.broadcom.com/support/do...=MegaRAID+SAS+9341-4i&pa=&po=&dk=&pl=&l=false
Tried to flash with: SAS3FLSH.EXE -0 -f SAS930~1.BIN
No Avago SAS adapters found! Limited Command Set Available!
My thought is there is a process that you need to go through to cross flash this card. I am really stuck here. Is it documented somewhere how to flash this card? Could someone provide a link or something or tell me how to make this work. Thanks!
