Firt not booting, after upgrade to 9.3 cant access the raid1 data

[Paulo P]

My nas wasn't booting, it stopped and after searching a lot, i get the information to upgrade ftom 9,2, to 9.3.
After the upgrade, my nas already boot and all the settings where ok, except for the data drive that was missing.
When i use "View Volumes" I get the RAID1 volume buyt status was degraded.
Saw a couple of guides and tried to follow a guide and did this:

1. Via the FreeNAS shell I ran “mount” to see which partition my storage mount was on (it was /dev/RAIDPP)
2. Via the FreeNAS web interface, I deleted the shares on the drive and deleted it from the drive management (this does not destroy the data on the drive, just detaches it apparently). Reboot
3. When tried to manually unmount the RAIDPP it wans't there anymore, so I Reboot.
   
4. I ran “fsck -t ufs -y /dev/RAIDPP ″ several times, but no errors appeared. Reboot
5. Via the FreeNAS web interface, I'm trying to import the RAID volume but it doesn't appear!

What can I do more? Can I access one of the drives, rescue the data and rebuild the NAS? How?

Please help me, I can't find anything else...

 

[Ericloewe]

FreeNAS 9.3 supports UFS for importing data only. You need to setup a ZFS pool.

 

[Paulo P]

Simple solution: pen drive filesystem was damaged.
Format, wrote new Freenas image, recreate user, share and import UFS RAID1
All is working now.
As the machine has only 4 GB, had to go back to 9.2 version.