Hi All, I recently picked up 10 Seagate Exos x10 SAS drives and am having issues adding them to a pool in my truenas scale box.
When I went to add 4 of them to a raid-z2 it gets stuck on fetching.
I also got this notification
--> T10-Pi
So I checked my sda drive and it showed Protection type 2 but not 520-sectors
I ran the "sg_format -v -F /dev/sda" to remove it and its taken 2 days!
When it was done I did the same to sdb and its gonna take another two days..
I should have checked sda to see if it indeed removed it but I didn't lol
So my question mainly is am i going in the right direction and is this normal for it to take this long?
I've never heard of this before and I'm fairly new to Truenas as my main box is Unraid.
When I went to add 4 of them to a raid-z2 it gets stuck on fetching.
I also got this notification
Disk(s): sda, sdc, sdd, sdb are formatted with Data Integrity Feature (DIF) which is unsupported.
Now I did some research and found this article--> T10-Pi
So I checked my sda drive and it showed Protection type 2 but not 520-sectors
I ran the "sg_format -v -F /dev/sda" to remove it and its taken 2 days!
When it was done I did the same to sdb and its gonna take another two days..
I should have checked sda to see if it indeed removed it but I didn't lol
So my question mainly is am i going in the right direction and is this normal for it to take this long?
I've never heard of this before and I'm fairly new to Truenas as my main box is Unraid.