- Joined
- Jul 3, 2015
- Messages
- 926
Do you know what size disks you are using? If not go to Storage/Disks and check.
That's fine. As its a backup server I assume you are ok to power it down? If so you can check each drive once its powered down. IF you have a spare slot in the chassis then put a new drive in and replace da0 with your new drive and let it rebuild.Yea my challenge is knowing which disk is labeled what? I have an HP Z840 with 6 drive bays.
NoDoes either of these drives contain OS?
YepOkay so I assume drives must be same or bigger correct?
Replacement happens from Storage/Pools /cog wheel/ Statusso Once I replace these drives what is the procedure to rebuild