- Joined
- Dec 11, 2015
- Messages
- 1,410
Hello folks,
In a series of migration & updating, my pool does not seem to import no longer.
The following happened unplanned across several months (hence the somewhat >WTF< ...)
Machine 1: X11-SSL, ESXi 6.5, passthroughed 9201-16i. Been running for a few years. Last known FreeNAs update 11.2-U7 (as far as I can remember I did the zfs upgrade a few patches ago). This config file was imported into machine 2 successfully.
Then moving drives over to Machine 2: SCE-847, X8 system, with a 9211-8i (which also has been running freenas successfully a while during 2017) bare metal FreeNAS.
I do not manage to install a 11.2-U7 version ( https://download.freenas.org/11.2/STABLE/U7/)
Instead I install 11.3-U3.2, and import my last working config from 11.2-U7.
The import seems successful in terms of general settings. However, the pool "wd60efrx" is listed in the UI, as "unknown" at the Storage/Pools menu.
In Storage / Disks, all drives are found as "unused".
I <might> have had a LOG device connected at some point in time, would that lacking cause the pool to ...do whatever it does?
Cheers
In a series of migration & updating, my pool does not seem to import no longer.
The following happened unplanned across several months (hence the somewhat >WTF< ...)
Machine 1: X11-SSL, ESXi 6.5, passthroughed 9201-16i. Been running for a few years. Last known FreeNAs update 11.2-U7 (as far as I can remember I did the zfs upgrade a few patches ago). This config file was imported into machine 2 successfully.
Then moving drives over to Machine 2: SCE-847, X8 system, with a 9211-8i (which also has been running freenas successfully a while during 2017) bare metal FreeNAS.
I do not manage to install a 11.2-U7 version ( https://download.freenas.org/11.2/STABLE/U7/)
Instead I install 11.3-U3.2, and import my last working config from 11.2-U7.
The import seems successful in terms of general settings. However, the pool "wd60efrx" is listed in the UI, as "unknown" at the Storage/Pools menu.
In Storage / Disks, all drives are found as "unused".
I <might> have had a LOG device connected at some point in time, would that lacking cause the pool to ...do whatever it does?
Code:
root@blackhole:~ # zpool list NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT freenas-boot 29.5G 1.01G 28.5G - - 0% 3% 1.00x ONLINE - root@blackhole:~ # zfs list NAME USED AVAIL REFER MOUNTPOINT freenas-boot 1.01G 27.6G 23K none freenas-boot/.system 6.09M 27.6G 25K legacy freenas-boot/.system/configs-0dc2ca1e7fa9464d8c4d7c4fd81f6855 23K 27.6G 23K legacy freenas-boot/.system/configs-646f8dae97d646cc8946ddeb0ca79d97 23K 27.6G 23K legacy freenas-boot/.system/configs-918f8f8785054bb0919cdacb5658a136 23K 27.6G 23K legacy freenas-boot/.system/cores 450K 27.6G 450K legacy freenas-boot/.system/rrd-0dc2ca1e7fa9464d8c4d7c4fd81f6855 1.84M 27.6G 1.84M legacy freenas-boot/.system/rrd-646f8dae97d646cc8946ddeb0ca79d97 1.24M 27.6G 1.24M legacy freenas-boot/.system/rrd-918f8f8785054bb0919cdacb5658a136 1.73M 27.6G 1.73M legacy freenas-boot/.system/samba4 53K 27.6G 53K legacy freenas-boot/.system/syslog-0dc2ca1e7fa9464d8c4d7c4fd81f6855 80.5K 27.6G 80.5K legacy freenas-boot/.system/syslog-646f8dae97d646cc8946ddeb0ca79d97 390K 27.6G 390K legacy freenas-boot/.system/syslog-918f8f8785054bb0919cdacb5658a136 218K 27.6G 218K legacy freenas-boot/.system/webui 23K 27.6G 23K legacy freenas-boot/ROOT 1.00G 27.6G 23K none freenas-boot/ROOT/Initial-Install 1K 27.6G 1019M legacy freenas-boot/ROOT/default 1.00G 27.6G 1019M legacy root@blackhole:~ # zpool status wd60efrx cannot open 'wd60efrx': no such pool
Cheers