Driver installation for raid board

[zz25]

Greetings to the whole forum.
I bought a used computer for a few euros to create a nas, and when I opened it I noticed that it has an ASR 6405E 128MB raid card to which 2 x 4TB HDs are connected.
I have installed freenas on an old HD SSD, but when I enter the configurations the 2 HDs are not visible.
I don't have great skills, so I need someone to teach me step by step how to install the card driver to be able to manage the 2 HDs.
Thanks in advance.

Greetings

 

[sretalla]

raid card

Please read this:

What's all the noise about HBA's, and why can't I use a RAID controller?

This is relevant to FreeNAS and TrueNAS CORE. Some parts of it might also be relevant to Scale, but I don't really know how reliable the Linux drivers are. 1) An HBA is a Host Bus Adapter. This is a controller that allows SAS and SATA devices to be attached to, and communicate directly with...

www.truenas.com

 

[jgreco]

Please try connecting the hard drives directly to the mainboard. The ASR card is not usable.

 

[zz25]

Thanks to both of you for the replies.
I removed the card and now I see both two discs. Now I have another problem. I have followed many tutorials of truenas, but when I try to add the created folder to network resources, by entering IP address and folder name, I cannot access it, as if the user is not recognized. I have activated SMB on the pc but I cannot see the folder. Could you please help me? Thank you Greetings

 

[sretalla]

Could you share some screenshots of how you have configured your share?

 

[zz25]

Hi sretalla and thanks for yuor intersting
Below you can find the configuration of my truenas.
I've seen many tutorials and i followed them for configuration.
I trust in your help in solving my problem.

Thanks

 

[sretalla]

OK, so from 6.pdf, we can see that you haven't made your user the owner.

You need to put your user there as the root user can't be the owner of a share.

You should also check the box to apply user after that.

 

[zz25]

Hi sretalla and thank again for your valuable help.
I've done what you suggested but i've again the same problem.
I don't know how to do

Regards

 

[zz25]

Please sretall, see attached file