Recommendations on whether this drive should be RMA'd? This is the first time I've ever run these tests. Thoughts/recommendations from the more experienced crowd would be greatly appreciated.
After a night of running "badblocks" on eight WD 3TB drives, one of my drives is showing read errors. The badblocks ongoing test looked like this:
set_o_direct: Inappropriate ioctl for devices)
9608032 done, 7:12:11 elapsed. (27/0/0 er
9608033 done, 7:12:15 elapsed. (28/0/0 er
9608034 done, 7:12:18 elapsed. (30/0/0 er
set_o_direct: Inappropriate ioctl for device
set_o_direct: Inappropriate ioctl for devices)
9609704 done, 7:12:29 elapsed. (31/0/0 er
set_o_direct: Inappropriate ioctl for devices
. . . more stuff that I accidentally overwrote
58.62% done, 10:45:06 elapsed. (32/0/0 errors)
The console is also showing multiple Error 5, unretryable error on drive da5. For example:
Error 5, Unretryable error
READ(10). CDB: 28 00 01 25 36 c6 00 00 02 00
CAM status: SCSI Status Error
SCSI status: Check Condition
SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
Info: 0x12536c6
Here's the output from smartctl -a /dev/da5:
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 199 199 051 Pre-fail Always - 542
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 2
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 62
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 7
194 Temperature_Celsius 0x0022 118 116 000 Old_age Always - 32
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 15
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 9 -
# 2 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
After a night of running "badblocks" on eight WD 3TB drives, one of my drives is showing read errors. The badblocks ongoing test looked like this:
set_o_direct: Inappropriate ioctl for devices)
9608032 done, 7:12:11 elapsed. (27/0/0 er
9608033 done, 7:12:15 elapsed. (28/0/0 er
9608034 done, 7:12:18 elapsed. (30/0/0 er
set_o_direct: Inappropriate ioctl for device
set_o_direct: Inappropriate ioctl for devices)
9609704 done, 7:12:29 elapsed. (31/0/0 er
set_o_direct: Inappropriate ioctl for devices
. . . more stuff that I accidentally overwrote
58.62% done, 10:45:06 elapsed. (32/0/0 errors)
The console is also showing multiple Error 5, unretryable error on drive da5. For example:
Error 5, Unretryable error
READ(10). CDB: 28 00 01 25 36 c6 00 00 02 00
CAM status: SCSI Status Error
SCSI status: Check Condition
SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
Info: 0x12536c6
Here's the output from smartctl -a /dev/da5:
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 199 199 051 Pre-fail Always - 542
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 2
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 62
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 7
194 Temperature_Celsius 0x0022 118 116 000 Old_age Always - 32
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 15
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 9 -
# 2 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.