Hi,
My bootdisk just died. So i went on and reinstalled Truenas Core 12v5 on a fresh SSD.
I had a backup config file that i loaded in. Everything seem ok and pools are healthy.
The issue i have is that not all disks are shown in the webCLI. If i do "zpool status tank" pool is valid and ok. But i have a mix of gptid and generic device names.
My setup:
* TrueNAS-12.0-U5
* MB: Supermicro X10SL7-F
* CPU: i3-4130T
* RAM: 32gb ECC
* 2x ssd for VM storage
* 8x 2tb disks for generic storage
I think i have done some misconfiguration with my disks or pool.
1. Are zfs disks really supposed to have partition names?
(see pictures below) da0 does not show in webCLU at all, da4 and da7 shows but not connected to pool according to webCLI.
Does this mean i have some disks used raw and some used by partition?
I tried this from another thread but that did not change anything:
2. webCLI and zpool does match, but when i first booted up after configuration loaded truenas compained about primary partition table not being available. Is this an issue?
//KufrA
My bootdisk just died. So i went on and reinstalled Truenas Core 12v5 on a fresh SSD.
I had a backup config file that i loaded in. Everything seem ok and pools are healthy.
The issue i have is that not all disks are shown in the webCLI. If i do "zpool status tank" pool is valid and ok. But i have a mix of gptid and generic device names.
My setup:
* TrueNAS-12.0-U5
* MB: Supermicro X10SL7-F
* CPU: i3-4130T
* RAM: 32gb ECC
* 2x ssd for VM storage
* 8x 2tb disks for generic storage
I think i have done some misconfiguration with my disks or pool.
1. Are zfs disks really supposed to have partition names?
(see pictures below) da0 does not show in webCLU at all, da4 and da7 shows but not connected to pool according to webCLI.
Does this mean i have some disks used raw and some used by partition?
I tried this from another thread but that did not change anything:
Code:
zpool import tank -d /dev/gptid/
2. webCLI and zpool does match, but when i first booted up after configuration loaded truenas compained about primary partition table not being available. Is this an issue?
//KufrA
Code:
pool: tank state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(5) for details. scan: resilvered 1.36T in 1 days 19:36:07 with 0 errors on Thu Jul 15 13:27:27 2021 config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 da0 ONLINE 0 0 0 gptid/9d19c650-8150-11e8-8f76-0cc47a692412 ONLINE 0 0 0 gptid/a6f3d36d-535b-11e6-91b2-0cc47a692412 ONLINE 0 0 0 gptid/2a2ca295-e3f2-11eb-abc0-0cc47a692412 ONLINE 0 0 0 da4 ONLINE 0 0 0 gptid/1cc41fd2-b2d9-11e9-a1e0-0cc47a692412 ONLINE 0 0 0 gptid/1b856e99-0f60-11e8-b78b-0cc47a692412 ONLINE 0 0 0 da7 ONLINE 0 0 0