Hi Everyone, I wanted to run my current issue as a new Freenas user and experiencing a Degraded Status for the first time. It looks like even though the Drives are Brand New (Retail) one is failing!!
Any input would be appreciate.
System Details
Intel Xeon E3-1245 V5 3.5 GHz Quad-Core Processor
Supermicro MBD-X11SSH-F Micro ATX LGA1151 Motherboard
ECC Samsung 16 GB (4 x 16 GB) DDR4-2133 Memory M391A2K43BB1-CPB
6x Western Digital Red 3 TB 3.5" 5400RPM Internal Hard Drive
SeaSonic 650 W 80+ Gold Certified Semi-modular ATX Power Supply
2x CableCreation Internal HD Mini SAS (SFF-8643 Host) - 4x SATA (Target) Cable
Any input would be appreciate.
System Details
Intel Xeon E3-1245 V5 3.5 GHz Quad-Core Processor
Supermicro MBD-X11SSH-F Micro ATX LGA1151 Motherboard
ECC Samsung 16 GB (4 x 16 GB) DDR4-2133 Memory M391A2K43BB1-CPB
6x Western Digital Red 3 TB 3.5" 5400RPM Internal Hard Drive
SeaSonic 650 W 80+ Gold Certified Semi-modular ATX Power Supply
2x CableCreation Internal HD Mini SAS (SFF-8643 Host) - 4x SATA (Target) Cable
Code:
root@FreeNAS[~]# zpool status
pool: NAS_POOL
state: DEGRADED
status: One or more devices are faulted in response to persistent errors.
Sufficient replicas exist for the pool to continue functioning in a
degraded state.
action: Replace the faulted device, or use 'zpool clear' to mark the device
repaired.
scan: scrub repaired 0 in 0 days 01:03:24 with 0 errors on Sun Nov 3 01:03:25 2019
config:
NAME STATE READ WRITE CKSUM
NAS_POOL DEGRADED 0 0 0
raidz1-0 DEGRADED 0 0 0
gptid/b4aa1afb-1bd2-11e9-97a0-0050568ec6be.eli ONLINE 0 0 0
gptid/b5c2c09f-1bd2-11e9-97a0-0050568ec6be.eli ONLINE 0 0 0
gptid/b6d618d5-1bd2-11e9-97a0-0050568ec6be.eli ONLINE 0 0 0
gptid/b7e74f43-1bd2-11e9-97a0-0050568ec6be.eli ONLINE 0 0 0
gptid/b8f91ff9-1bd2-11e9-97a0-0050568ec6be.eli ONLINE 0 0 0
gptid/ba075785-1bd2-11e9-97a0-0050568ec6be.eli FAULTED 9 673 0 too many errors
gptid/bb23347c-1bd2-11e9-97a0-0050568ec6be.eli ONLINE 0 0 0
errors: No known data errors
pool: freenas-boot
state: ONLINE
status: One or more devices are configured to use a non-native block size.
Expect reduced performance.
action: Replace affected devices with devices that support the
configured block size, or migrate data to a properly configured
pool.
scan: scrub repaired 0 in 0 days 00:00:19 with 0 errors on Mon Nov 4 03:45:19 2019
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da0p2 ONLINE 0 0 0 block size: 512B configured, 4096B native
errors: No known data errors
root@FreeNAS[~]#
Code:
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD30EFRX-68EUZN0
Firmware Version: 82.00A82
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Nov 4 07:47:45 2019 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (40680) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 408) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 179 178 021 - 6033
4 Start_Stop_Count -O--CK 100 100 000 - 165
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 090 090 000 - 7756
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 165
192 Power-Off_Retract_Count -O--CK 200 200 000 - 163
193 Load_Cycle_Count -O--CK 200 200 000 - 721
194 Temperature_Celsius -O---K 107 100 000 - 43
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 1336 hours (55 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 49 66 32 78 40 00 Error: IDNF at LBA = 0x49663278 = 1231434360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 00 00 00 49 66 32 78 40 00 23:01:53.311 WRITE FPDMA QUEUED
ea 00 00 00 00 00 00 00 00 00 00 40 00 23:01:51.147 FLUSH CACHE EXT
61 00 08 00 18 00 01 5d 50 a1 c0 40 00 23:01:51.147 WRITE FPDMA QUEUED
61 00 08 00 10 00 01 5d 50 9f c0 40 00 23:01:51.147 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 40 03 c0 40 00 23:01:51.147 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7583 -
# 2 Short offline Completed without error 00% 7247 -
# 3 Short offline Completed without error 00% 6863 -
# 4 Short offline Completed without error 00% 6528 -
# 5 Short offline Completed without error 00% 6120 -
# 6 Short offline Completed without error 00% 5785 -
# 7 Short offline Completed without error 00% 5379 -
# 8 Short offline Completed without error 00% 5044 -
# 9 Short offline Completed without error 00% 4660 -
#10 Short offline Completed without error 00% 4324 -
#11 Short offline Completed without error 00% 3917 -
#12 Short offline Completed without error 00% 3581 -
#13 Short offline Completed without error 00% 3198 -
#14 Short offline Completed without error 00% 2862 -
#15 Short offline Completed without error 00% 2455 -
#16 Short offline Completed without error 00% 2119 -
#17 Short offline Completed without error 00% 1784 -
#18 Short offline Completed without error 00% 1448 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 43 Celsius
Power Cycle Min/Max Temperature: 36/50 Celsius
Lifetime Min/Max Temperature: 2/50 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (44)
Index Estimated Time Temperature Celsius
45 2019-11-03 23:50 43 ************************
... ..(476 skipped). .. ************************
44 2019-11-04 07:47 43 ************************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 8007188 Vendor specific
root@FreeNAS[~]#
