I recently got this alert:
"Pool SSDPool state is ONLINE: One or more devices has experienced an error resulting in data corruption. Applications may be affected."
I found the culprit directory, I can't delete it, but I could rename and move it so that it's not causing any major issue. Yet my cloud replication fails because of it.
I really wish the TrueNas doc and tutorial covered this type of stressful situation.
My system is very simple. Too simple for some of you, but I'm fine with it
The SSD seems to be healthy so far, don't you agree? What are my options? Do I delete only the one dataset and restore it from my USB drive? Or do I need to kill the pool completely and restore all the datasets to it? Can I trust the latest dataset snapshot that have been replicated since they contain this "corrupted_dir" folder? Will I need to redeploy all my applications (they all use host path)?
Thanks for your help.
"Pool SSDPool state is ONLINE: One or more devices has experienced an error resulting in data corruption. Applications may be affected."
I found the culprit directory, I can't delete it, but I could rename and move it so that it's not causing any major issue. Yet my cloud replication fails because of it.
I really wish the TrueNas doc and tutorial covered this type of stressful situation.
My system is very simple. Too simple for some of you, but I'm fine with it
- TrueNAS-SCALE-22.12.4.2
- Boot pool is on a single NVME drive
- My HDDPool is on a single 4TB spinning drive
- The SSDPool is on single 0.5TB SSD drive to host my application (containers) config and data
- A backup pool is on single USB attached drive
Code:
pool: HDDPool state: ONLINE scan: scrub repaired 0B in 05:27:43 with 0 errors on Sat Dec 9 06:27:45 2023 config: NAME STATE READ WRITE CKSUM HDDPool ONLINE 0 0 0 be70b993-b12a-4d32-abc1-8a44b9ba0428 ONLINE 0 0 0 errors: No known data errors pool: SSDPool state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:05:05 with 0 errors on Sat Dec 9 00:05:06 2023 config: NAME STATE READ WRITE CKSUM SSDPool ONLINE 0 0 0 ddaa4e35-c9f3-4d3b-ad89-ef169445ee8d ONLINE 0 0 48 errors: Permanent errors have been detected in the following files: /mnt/SSDPool/applications/corrupted_dir pool: UsbBackupPool state: ONLINE scan: scrub repaired 0B in 03:56:37 with 0 errors on Sat Dec 9 05:56:41 2023 config: NAME STATE READ WRITE CKSUM UsbBackupPool ONLINE 0 0 0 b5f182aa-1461-4f48-b2d2-3262cef754a2 ONLINE 0 0 0 errors: No known data errors pool: boot-pool state: ONLINE status: Some supported and requested features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details. scan: scrub repaired 0B in 00:00:05 with 0 errors on Tue Dec 12 03:45:07 2023 config: NAME STATE READ WRITE CKSUM boot-pool ONLINE 0 0 0 nvme0n1p3 ONLINE 0 0 0 errors: No known data errors
Code:
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.131+truenas] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Desktop HDD.15 Device Model: ST4000DM000-1F2168 Serial Number: Z304YFMF LU WWN Device Id: 5 000c50 086ed586f Firmware Version: CC54 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Dec 12 11:18:57 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 107) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 502) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 173331360 3 Spin_Up_Time 0x0003 100 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3627 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 170681065 9 Power_On_Hours 0x0032 046 046 000 Old_age Always - 47448 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 2013 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 066 059 045 Old_age Always - 34 (Min/Max 30/39) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 424654 194 Temperature_Celsius 0x0022 034 041 000 Old_age Always - 34 (0 11 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 22008h+44m+18.914s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 86835629362 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1746342310339 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 47389 - # 2 Short offline Completed without error 00% 47293 - # 3 Short offline Completed without error 00% 47221 - # 4 Extended offline Completed without error 00% 47183 - # 5 Short offline Completed without error 00% 47125 - # 6 Short offline Completed without error 00% 47053 - # 7 Short offline Completed without error 00% 46957 - # 8 Short offline Completed without error 00% 46885 - # 9 Short offline Completed without error 00% 46789 - #10 Short offline Completed without error 00% 46717 - #11 Short offline Completed without error 00% 46621 - #12 Short offline Completed without error 00% 46549 - #13 Extended offline Completed without error 00% 46463 - #14 Short offline Completed without error 00% 46453 - #15 Short offline Completed without error 00% 46380 - #16 Short offline Completed without error 00% 46284 - #17 Short offline Completed without error 00% 46212 - #18 Short offline Completed without error 00% 46116 - #19 Short offline Completed without error 00% 46044 - #20 Short offline Completed without error 00% 45948 - #21 Short offline Completed without error 00% 45876 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
The SSD seems to be healthy so far, don't you agree? What are my options? Do I delete only the one dataset and restore it from my USB drive? Or do I need to kill the pool completely and restore all the datasets to it? Can I trust the latest dataset snapshot that have been replicated since they contain this "corrupted_dir" folder? Will I need to redeploy all my applications (they all use host path)?
Thanks for your help.
Last edited by a moderator: