Charger_Replicat
Dabbler
- Joined
- Mar 27, 2023
- Messages
- 10
I noticed that zpool status reports 14 data errors.
I ran an extended test on both drives and the test completed with no errors. One of the drives took longer to complete the test, stuck on 10% remaining for a few hours, but did complete successfully. Attached are the reports for each drive.
Although drives can fail at any time, these drives are only 1 year old and have been under extremely light usage.
Is the data corruption the result of failing drives, bad SATA cables, or a bad controller? Given the extended SMART test passed for both drives, I assume changing the SATA cables is the next step? Followed by replacing the controller, which is the motherboard, so I would have to add a PCIe SATA controller.
Any help is appreciated. Thanks.
I ran an extended test on both drives and the test completed with no errors. One of the drives took longer to complete the test, stuck on 10% remaining for a few hours, but did complete successfully. Attached are the reports for each drive.
Although drives can fail at any time, these drives are only 1 year old and have been under extremely light usage.
Is the data corruption the result of failing drives, bad SATA cables, or a bad controller? Given the extended SMART test passed for both drives, I assume changing the SATA cables is the next step? Followed by replacing the controller, which is the motherboard, so I would have to add a PCIe SATA controller.
Any help is appreciated. Thanks.