profwalken
Patron
- Joined
- Nov 19, 2013
- Messages
- 410
Hi,
need some advice on messages received from my Asrock Board:
I've already tried to change all sata cables, also switched all ports for hdd with no more result. Board has intel controler one side and marvell the other one, all HDD are
WD RED , system boot on a 120Go ssd mirror.
Messages are concerning always ada3 and also often ipmi0
I've done a RMA change with asrock so the board is new with latest firmware and bios.
If you have any idea on what to check , and do you think it's a big problem or not because i don't see any problem in using the NAS
need some advice on messages received from my Asrock Board:
Code:
SRV-SATURNE.local kernel log messages: ahcich5: Timeout on slot 27 port 0 ahcich5: is 00000008 cs 00000000 ss 00000000 rs 08000000 tfd 40 serr 00000000 cmd 10009b17 (ada3:ahcich5:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 98 42 81 40 35 00 00 00 00 00 (ada3:ahcich5:0:0:0): CAM status: Command timeout (ada3:ahcich5:0:0:0): Retrying command ipmi0: KCS: Failed to read address ipmi0: KCS error: 5f ipmi0: KCS: Failed to read address ipmi0: KCS error: 5f ipmi0: KCS: Reply address mismatch ipmi0: KCS error: 5f ipmi0: KCS: Command mismatch ipmi0: KCS error: 5f ahcich5: Timeout on slot 8 port 0 ahcich5: is 00000008 cs 00000000 ss 00000000 rs 00000100 tfd 40 serr 00000000 cmd 10008817 (ada3:ahcich5:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 c0 a1 50 40 5d 01 00 00 00 00 (ada3:ahcich5:0:0:0): CAM status: Command timeout (ada3:ahcich5:0:0:0): Retrying command ipmi0: KCS: Failed to read address ipmi0: KCS error: 5f Limiting closed port RST response from 357 to 200 packets/sec Limiting closed port RST response from 496 to 200 packets/sec Limiting closed port RST response from 758 to 200 packets/sec -- End of security output --
I've already tried to change all sata cables, also switched all ports for hdd with no more result. Board has intel controler one side and marvell the other one, all HDD are
WD RED , system boot on a 120Go ssd mirror.
Messages are concerning always ada3 and also often ipmi0
I've done a RMA change with asrock so the board is new with latest firmware and bios.
If you have any idea on what to check , and do you think it's a big problem or not because i don't see any problem in using the NAS