gazgaz
Cadet
- Joined
- Aug 23, 2020
- Messages
- 4
Hi guys.
I switched to the FreeNAS system to expand my work opportunities. Before that, there was Zyxel NAS326.
Collected a small server parameters it can be seen in the signature.
I set it up to the best of my ability and everything seems to work. SMB is up and running, SSH is up and running, and so on.
The question arose to reconnect the dahua sd59230u-hni camera again, as it was with the previous NAS server, I decided to use NFS because of the ease of setup.
I turned on the service and shared the folder by specifying it in the settings. And everything seems to be seen and should have been written, but a camera folder for recording and one file is created, and then nothing happens. Not a record or anything else.
Below are screenshots with settings in sequence for understanding.
pool
nfs service settings
shared folder for recording and settings
settings in the camera
in the explorer you can see that the camera got through to the server, but further than creating a folder and one file did not reach
freenas network settings
Everything worked on the last server, which indicates that the camera and its settings were working properly.
I ask for help in setting up a bundle with Freenas
I noticed a message in the server console like this
Sorry for my English )))
I switched to the FreeNAS system to expand my work opportunities. Before that, there was Zyxel NAS326.
Collected a small server parameters it can be seen in the signature.
I set it up to the best of my ability and everything seems to work. SMB is up and running, SSH is up and running, and so on.
The question arose to reconnect the dahua sd59230u-hni camera again, as it was with the previous NAS server, I decided to use NFS because of the ease of setup.
I turned on the service and shared the folder by specifying it in the settings. And everything seems to be seen and should have been written, but a camera folder for recording and one file is created, and then nothing happens. Not a record or anything else.
Below are screenshots with settings in sequence for understanding.
pool
nfs service settings
shared folder for recording and settings
settings in the camera
in the explorer you can see that the camera got through to the server, but further than creating a folder and one file did not reach
freenas network settings
Everything worked on the last server, which indicates that the camera and its settings were working properly.
I ask for help in setting up a bundle with Freenas
I noticed a message in the server console like this
nfsd: cant't register svc nameSorry for my English )))
