Ascheriit06
Cadet
- Joined
- Jul 19, 2016
- Messages
- 2
Hi,
I know several people have already mentioned such issue.
I have quite often the message :
freenas smartd[2524]: Device: /dev/ada2, 216 Currently unreadable (pending) sectors
Here is what I did.
smartctl -t long /dev/ada2
Then, once done
smartctl -a /dev/ada2
It seems the long test didn't return any errors.
But when I run
smartctl -A /dev/ada2
I got
I am out of idea.
Any information what I should do or check ?
Thanks in advance.
Kind regards
I know several people have already mentioned such issue.
I have quite often the message :
freenas smartd[2524]: Device: /dev/ada2, 216 Currently unreadable (pending) sectors
Here is what I did.
smartctl -t long /dev/ada2
Then, once done
smartctl -a /dev/ada2
Code:
[root@freenas] ~# smartctl -a /dev/ada2
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF, SATA 6Gb/s)
Device Model: WDC WD30EZRX-00DC0B0
Serial Number: WD-WCC1T1441318
LU WWN Device Id: 5 0014ee 25e0ebbe9
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jul 19 08:42:27 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (38880) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 390) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70b5) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 176 156 021 Pre-fail Always - 6191
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 21
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 23153
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 12
193 Load_Cycle_Count 0x0032 046 046 000 Old_age Always - 462034
194 Temperature_Celsius 0x0022 112 105 000 Old_age Always - 38
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 216
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 23148 -
# 2 Extended offline Completed without error 00% 23082 -
# 3 Short offline Completed without error 00% 23051 -
# 4 Short offline Completed without error 00% 23027 -
# 5 Extended offline Completed without error 00% 23010 -
# 6 Short offline Completed without error 00% 22979 -
# 7 Short offline Completed without error 00% 22955 -
# 8 Short offline Completed without error 00% 22931 -
# 9 Extended offline Completed without error 00% 22914 -
#10 Short offline Completed without error 00% 22883 -
#11 Short offline Completed without error 00% 22859 -
#12 Extended offline Completed without error 00% 22842 -
#13 Short offline Completed without error 00% 22811 -
#14 Short offline Completed without error 00% 22787 -
#15 Short offline Completed without error 00% 22763 -
#16 Extended offline Completed without error 00% 22746 -
#17 Short offline Completed without error 00% 22715 -
#18 Short offline Completed without error 00% 22691 -
#19 Extended offline Completed without error 00% 22674 -
#20 Short offline Completed without error 00% 22643 -
#21 Short offline Completed without error 00% 22619 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
It seems the long test didn't return any errors.
But when I run
smartctl -A /dev/ada2
I got
Code:
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 176 156 021 Pre-fail Always - 6191 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 21 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 23165 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 13 193 Load_Cycle_Count 0x0032 046 046 000 Old_age Always - 462034 194 Temperature_Celsius 0x0022 113 105 000 Old_age Always - 37 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 216 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
I am out of idea.
Any information what I should do or check ?
Thanks in advance.
Kind regards
