Drk
Dabbler
- Joined
- May 26, 2013
- Messages
- 38
CRITICAL: The following multipaths are not optimal: disk4, disk3, disk5, disk8, disk1, disk2, disk7, disk6.
I am running FreeNAS-8.3.1-RELEASE-p2-x64 (r12686+b770da6_dirty). This is installed on 2 highpoint sgl2720 with 8 drives each. I can not find anywhere why this happens and what to fix's it. I can build a zfs pool and it takes and shows right in the gui but i get this alert. This also is a new install, moved the drives around raid cards. If this helps any, i just added a new card and 8 more drives the mulitpaths are only on the old drives but this is a new install and a new config. I am at a loss for this. any help would be great.
Rodney
I am running FreeNAS-8.3.1-RELEASE-p2-x64 (r12686+b770da6_dirty). This is installed on 2 highpoint sgl2720 with 8 drives each. I can not find anywhere why this happens and what to fix's it. I can build a zfs pool and it takes and shows right in the gui but i get this alert. This also is a new install, moved the drives around raid cards. If this helps any, i just added a new card and 8 more drives the mulitpaths are only on the old drives but this is a new install and a new config. I am at a loss for this. any help would be great.
Rodney