Networker_77
Cadet
- Joined
- Jul 9, 2022
- Messages
- 1
Hi everyone.
I've been running a FreeNAS now TrueNAS server since 2014. Let me say up front that this was my first ever server build, so it does not include recommended hardware.
Yesterday, I received a notification of the error listed in the subject and similar to the one in this post: https://www.truenas.com/community/t...sage-attribute-194-temperature_celsius.77881/. The error concerns my boot drive, which is a 2-year-old Crucial BX500 120GB 3D NAND SATA SSD (CT120BX500SSD1).
Output of -a /dev/ada2:
The other post said that the error was a firmware problem because the drive is an SSD. Is the same thing happening here, or should I worry?
Thanks.
I've been running a FreeNAS now TrueNAS server since 2014. Let me say up front that this was my first ever server build, so it does not include recommended hardware.
Yesterday, I received a notification of the error listed in the subject and similar to the one in this post: https://www.truenas.com/community/t...sage-attribute-194-temperature_celsius.77881/. The error concerns my boot drive, which is a 2-year-old Crucial BX500 120GB 3D NAND SATA SSD (CT120BX500SSD1).
Output of -a /dev/ada2:
Code:
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron Client SSDs
Device Model: CT120BX500SSD1
Serial Number: 2038E4107E62
LU WWN Device Id: 0 000000 000000000
Firmware Version: M6CR013
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jul 9 10:11:06 2022 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 13452
12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 4
171 Program_Fail_Count 0x0032 100 100 050 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 050 Old_age Always - 0
173 Ave_Block-Erase_Count 0x0032 100 100 050 Old_age Always - 1
174 Unexpect_Power_Loss_Ct 0x0032 100 100 050 Old_age Always - 2
180 Unused_Reserve_NAND_Blk 0x0032 100 100 050 Old_age Always - 100
183 SATA_Interfac_Downshift 0x0032 100 100 050 Old_age Always - 0
184 Error_Correction_Count 0x0032 100 100 050 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 050 Old_age Always - 0
194 Temperature_Celsius 0x0022 055 048 050 Old_age Always In_the_past 45 (Min/Max 32/52)
196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0
197 Current_Pending_ECC_Cnt 0x0032 100 100 050 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 050 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0
202 Percent_Lifetime_Remain 0x0030 100 100 001 Old_age Offline - 100
206 Write_Error_Rate 0x002e 100 100 050 Old_age Always - 0
210 Success_RAIN_Recov_Cnt 0x0032 100 100 050 Old_age Always - 0
246 Total_LBAs_Written 0x0032 100 100 050 Old_age Always - 38461451
247 Host_Program_Page_Count 0x0032 100 100 050 Old_age Always - 1201920
248 FTL_Program_Page_Count 0x0032 100 100 050 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
The other post said that the error was a firmware problem because the drive is an SSD. Is the same thing happening here, or should I worry?
Thanks.