Louis_Cyphre
Cadet
- Joined
- Aug 28, 2020
- Messages
- 6
So, i only have 8TB WD RED drives in my raid, with the exception of one 8TB Ironwolf disk. Two of the WD drives are 2 year old and all the others, including the Seagate are 1 year old. A couple of days ago i got this error "Critical error - ata2 error count increased from 0 to 1".
Here is the question, is my drive failing? Only found some old thread on this and a thread where someone had this error on all of his drives.
I have heard that the Ironwolf is not as reliable as the WD's, but after one year? My drives are running at temperatures just around 37-41°
Intel i5-9600K
Asus Prime B365M -A
16GB DDR4-2666
4x WD 8TB RED
1x Seagate 8TB Ironwolf
Intel Gigabit PCI-E EXPI9301CTBLK
Here is the question, is my drive failing? Only found some old thread on this and a thread where someone had this error on all of his drives.
I have heard that the Ironwolf is not as reliable as the WD's, but after one year? My drives are running at temperatures just around 37-41°
Intel i5-9600K
Asus Prime B365M -A
16GB DDR4-2666
4x WD 8TB RED
1x Seagate 8TB Ironwolf
Intel Gigabit PCI-E EXPI9301CTBLK
Code:
root@freenas[~]# smartctl -a /dev/ada2
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate IronWolf
Device Model: ST8000VN004-2M2101
Serial Number: WSD5NE4V
LU WWN Device Id: 5 000c50 0e3701740
Firmware Version: SC60
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 6 00:39:22 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 559) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 698) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x50bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 084 064 044 Pre-fail Always - 226168952
3 Spin_Up_Time 0x0003 084 084 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 9
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 64
7 Seek_Error_Rate 0x000f 082 060 045 Pre-fail Always - 158797125
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6784
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 9
18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 098 098 000 Old_age Always - 2
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 060 055 040 Old_age Always - 40 (Min/Max 29/45)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 291
194 Temperature_Celsius 0x0022 040 045 000 Old_age Always - 40 (0 26 0 0 0)
195 Hardware_ECC_Recovered 0x001a 084 064 000 Old_age Always - 226168952
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 6772 (146 91 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 13728089576
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 36338870808
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 6615 hours (275 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 58 ff ff ff 4f 00 28d+04:44:09.104 READ FPDMA QUEUED
60 00 58 ff ff ff 4f 00 28d+04:44:09.104 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 28d+04:44:03.427 WRITE FPDMA QUEUED
60 00 50 ff ff ff 4f 00 28d+04:44:02.288 READ FPDMA QUEUED
60 00 58 ff ff ff 4f 00 28d+04:44:01.780 READ FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 6364 hours (265 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 58 ff ff ff 4f 00 17d+18:03:46.415 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 17d+18:03:46.415 WRITE FPDMA QUEUED
60 00 50 ff ff ff 4f 00 17d+18:03:46.414 READ FPDMA QUEUED
60 00 b0 ff ff ff 4f 00 17d+18:03:35.781 READ FPDMA QUEUED
60 00 50 ff ff ff 4f 00 17d+18:03:34.017 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 6770 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
