- CRITICAL: Sept. 6, 2017, 9:18 p.m. - Device: /dev/ada0, 12584 Currently unreadable (pending) sectors
- CRITICAL: Sept. 6, 2017, 9:18 p.m. - Device: /dev/ada0, 12584 Offline uncorrectable sectors
- CRITICAL: Sept. 6, 2017, 9:19 p.m. - The volume Disk12TB state is ONLINE: One or more devices has experienced an error resulting in data corruption. Applications may be affected.
I ran a smartctl -t short -C /dev/ada0
Below are the results.
Code:
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.0-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST2000DM001-9YN164 Serial Number: W1E07H33 LU WWN Device Id: 5 000c50 0454f83f1 Firmware Version: CC9D User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Wed Sep 6 21:33:12 2017 ACST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 244) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3081) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 090 090 006 Pre-fail Always - 66762136 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 156 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 8735073364 9 Power_On_Hours 0x0032 083 082 000 Old_age Always - 14944 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 125 183 Runtime_Bad_Block 0x0032 093 093 000 Old_age Always - 7 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 248 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 9 9 9 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2 190 Airflow_Temperature_Cel 0x0022 082 039 045 Old_age Always In_the_past 18 (0 94 18 17 0) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 91 193 Load_Cycle_Count 0x0032 033 033 000 Old_age Always - 134125 194 Temperature_Celsius 0x0022 018 061 000 Old_age Always - 18 (0 11 0 0 0) 197 Current_Pending_Sector 0x0012 063 017 000 Old_age Always - 6184 198 Offline_Uncorrectable 0x0010 063 017 000 Old_age Offline - 6184 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 2927h+51m+00.851s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1450126304226 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 838585338767 SMART Error Log Version: 1 ATA Error Count: 226 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 226 occurred at disk power-on lifetime: 14944 hours (622 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 20 d5 b4 05 Error: UNC at LBA = 0x05b4d520 = 95737120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 20 d5 b4 e5 00 00:30:50.532 READ DMA c8 00 28 20 d5 b4 e5 00 00:30:47.125 READ DMA b0 d5 01 06 4f c2 e0 00 00:30:47.021 SMART READ LOG c8 00 28 20 d5 b4 e5 00 00:30:43.593 READ DMA b0 d5 01 00 4f c2 e0 00 00:30:43.524 SMART READ LOG Error 225 occurred at disk power-on lifetime: 14944 hours (622 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 20 d5 b4 05 Error: UNC at LBA = 0x05b4d520 = 95737120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 20 d5 b4 e5 00 00:30:47.125 READ DMA b0 d5 01 06 4f c2 e0 00 00:30:47.021 SMART READ LOG c8 00 28 20 d5 b4 e5 00 00:30:43.593 READ DMA b0 d5 01 00 4f c2 e0 00 00:30:43.524 SMART READ LOG c8 00 28 20 d5 b4 e5 00 00:30:40.100 READ DMA Error 224 occurred at disk power-on lifetime: 14944 hours (622 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 20 d5 b4 05 Error: UNC at LBA = 0x05b4d520 = 95737120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 20 d5 b4 e5 00 00:30:43.593 READ DMA b0 d5 01 00 4f c2 e0 00 00:30:43.524 SMART READ LOG c8 00 28 20 d5 b4 e5 00 00:30:40.100 READ DMA b0 d0 01 00 4f c2 e0 00 00:30:39.445 SMART READ DATA c8 00 28 20 d5 b4 e5 00 00:30:36.550 READ DMA Error 223 occurred at disk power-on lifetime: 14944 hours (622 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 20 d5 b4 05 Error: UNC at LBA = 0x05b4d520 = 95737120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 20 d5 b4 e5 00 00:30:40.100 READ DMA b0 d0 01 00 4f c2 e0 00 00:30:39.445 SMART READ DATA c8 00 28 20 d5 b4 e5 00 00:30:36.550 READ DMA c8 00 08 d8 73 5d e0 00 00:30:36.549 READ DMA c8 00 08 48 5f 55 e0 00 00:30:36.549 READ DMA Error 222 occurred at disk power-on lifetime: 14944 hours (622 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 20 d5 b4 05 Error: UNC at LBA = 0x05b4d520 = 95737120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 20 d5 b4 e5 00 00:30:36.550 READ DMA c8 00 08 d8 73 5d e0 00 00:30:36.549 READ DMA c8 00 08 48 5f 55 e0 00 00:30:36.549 READ DMA c8 00 08 20 7e 54 e0 00 00:30:36.549 READ DMA ca 00 10 90 02 40 e0 00 00:30:36.549 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short captive Completed: read failure 90% 14944 95737120 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Can someone help me understand how bad it is?