zamana
Contributor
- Joined
- Jun 4, 2017
- Messages
- 163
Hi!
Of course that I try to avoid Plex transcoding at all costs, but sometimes it happens, and every time it happens, my CPU goes high... and get really hot. So hot that the motherboard starts to screaming (and beeps) until I stop the streaming. The temperatures goes to around 100 Celsius/212 Fahrenheit.
By the way, I tried to convert a VIDEO_TS/*.VOB files into an MKV using ffmpeg, but I was forced to stop the process one minute later because of this same behavior.
That's the hardware:
CPU: Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz (8 cores)
MB: Supermicro X11SSL-CF
RAM: 32GB (DDR4/ECC)
Is there any kind of tuning that can be done to alleviate this load?
Sometimes it seems that this hardware combination wasn't done for this kind of job...
Thanks.
Regards.
Of course that I try to avoid Plex transcoding at all costs, but sometimes it happens, and every time it happens, my CPU goes high... and get really hot. So hot that the motherboard starts to screaming (and beeps) until I stop the streaming. The temperatures goes to around 100 Celsius/212 Fahrenheit.
By the way, I tried to convert a VIDEO_TS/*.VOB files into an MKV using ffmpeg, but I was forced to stop the process one minute later because of this same behavior.
That's the hardware:
CPU: Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz (8 cores)
MB: Supermicro X11SSL-CF
RAM: 32GB (DDR4/ECC)
Is there any kind of tuning that can be done to alleviate this load?
Sometimes it seems that this hardware combination wasn't done for this kind of job...
Thanks.
Regards.