Axl_fzetafs
Cadet
- Joined
- Dec 4, 2022
- Messages
- 7
I have Core 13.0-U1 installed on a SuperMicro X8ST3-F and 2x 500Gb mechanical drives (ada0 and ada1) for boot.
I chose to go for fresh installation. The wizard shows me the installation is about U4. The process completes with no issues, I'm only asked for the root password. Once the installation is over and I reboot I still get the previous settings for the network and the version is U1.
What the heck?
I ran the shell from the installer USB and wiped the first 1024 Mb of ada0 and ada1 (dd if=/dev/random of=/dev/ada[0,1] bsize=1048576 count=1000) and still after installing again I get the version U1.
What's wrong with my installing process?
Alex
I chose to go for fresh installation. The wizard shows me the installation is about U4. The process completes with no issues, I'm only asked for the root password. Once the installation is over and I reboot I still get the previous settings for the network and the version is U1.
What the heck?
I ran the shell from the installer USB and wiped the first 1024 Mb of ada0 and ada1 (dd if=/dev/random of=/dev/ada[0,1] bsize=1048576 count=1000) and still after installing again I get the version U1.
What's wrong with my installing process?
Alex