Console screen on system not displayed - EFI blind mode

[Ericloewe]

Ok, I am a bit confused. I have the same issue as noted above, where I cannot see any terminal messages beyond POST. If it edit the GRUB settings and set the KERNVT to "vt", I can see the terminal output until next reboot.

In the latest update to FreeNAS-9.10.1-U1 (ff51a5d), I was hoping something would be fixed with this. Have I missed something?
Thanks for any help.

It is fixed, but you have to manually regenerate the GRUB config:

grub-mkconfig -o /boot/grub/grub.cfg

 

[Michael De Cou]

It is fixed, but you have to manually regenerate the GRUB config:

grub-mkconfig -o /boot/grub/grub.cfg

Done and fixed! Thanks for the quick reply.

 

[Charles 6900]

Same problem, Already try this and did not work, any ideas?
BTW not a super user, please be specific on the instructions

 

[Ericloewe]

Same problem

Well, start by posting the exact FreeNAS version and your hardware, per the forum rules.

 

[Charles 6900]

it was a FreeNAS 9.10.1-U4, sis the upgrade to the 9.10.2

Mother board = MSI B150M PRO-VD
Processor = Intel pentium G4400 Sky Lake
Hdd = 4X segate 2TB
Ram = 16 gig
Boot drive is a 32 gig sandisk ultra slim

 

[Ericloewe]

Have you tried both vt and sc?

 

[Charles 6900]

yes, same results...

 

[Charles 6900]

also try to reinstall the old version and it shows the same error.

 

[Ericloewe]

also try to reinstall the old version and it shows the same error.

But it was working before?

You have SSH access to the server, right? I assume everything is normal, there?

It sounds like it might be a hardware failure (or BIOS update gone wrong or whatever).