TrueNAS-13.0-U1
11th Gen Intel(R) Core(TM) i5-11400F @ 2.60GHz
32 GB of RAM
6x 5,46 TB Seagate IronWolfs in RAIDZ2 with 1TB NVME CASH drive
Every HDD show 6 Checksum errors and zpool status shows
SMART test shows no errors, I just paste one of them, the rest seems similar:
Do I need to worry?
11th Gen Intel(R) Core(TM) i5-11400F @ 2.60GHz
32 GB of RAM
6x 5,46 TB Seagate IronWolfs in RAIDZ2 with 1TB NVME CASH drive
Every HDD show 6 Checksum errors and zpool status shows
Code:
pool: ciasta_01
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
scan: scrub in progress since Mon Jul 18 18:31:30 2022
2.73T scanned at 2.80G/s, 906G issued at 930M/s, 6.63T total
0B repaired, 13.34% done, 01:48:02 to go
config:
NAME STATE READ WRITE CKSUM
ciasta_01 ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/6766691e-dd0f-11ec-863f-d85ed3a1c817 ONLINE 0 0 6
gptid/676e8d22-dd0f-11ec-863f-d85ed3a1c817 ONLINE 0 0 6
gptid/675d7896-dd0f-11ec-863f-d85ed3a1c817 ONLINE 0 0 6
gptid/6781d8c1-dd0f-11ec-863f-d85ed3a1c817 ONLINE 0 0 6
gptid/6779b133-dd0f-11ec-863f-d85ed3a1c817 ONLINE 0 0 6
gptid/674d74d5-dd0f-11ec-863f-d85ed3a1c817 ONLINE 0 0 6
cache
gptid/6626ee23-dd0f-11ec-863f-d85ed3a1c817 ONLINE 0 0 0
errors: Permanent errors have been detected in the following files:
ciasta_01/Backup@auto-2022-07-10_16-30:/domain/domainD2022-07-09T230031_B681.vbkSMART test shows no errors, I just paste one of them, the rest seems similar:
Code:
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate IronWolf
Device Model: ST6000VN001-2BB186
Serial Number: ***************
LU WWN Device Id: 5 000c50 0dbc15d43
Firmware Version: SC60
User Capacity: 6,001,175,126,016 bytes [6.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5425 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jul 18 18:50:21 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 721) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 074 064 006 Pre-fail Always - 24158792
3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 14
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 073 060 045 Pre-fail Always - 21622516
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1275
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
root@NASOLSZA[~]#
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 064 040 Old_age Always - 33 (Min/Max 20/36)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 49
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 65
194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 20 0 0 0)
195 Hardware_ECC_Recovered 0x001a 074 064 000 Old_age Always - 24158792
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1273h+48m+42.788s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3524124356
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 14427495997
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1233 -
# 2 Extended offline Completed without error 00% 1165 -
# 3 Short offline Completed without error 00% 1065 -
# 4 Short offline Completed without error 00% 897 -
# 5 Short offline Completed without error 00% 729 -
# 6 Short offline Completed without error 00% 560 -
# 7 Short offline Completed without error 00% 392 -
# 8 Short offline Completed without error 00% 224 -
# 9 Short offline Completed without error 00% 57 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Do I need to worry?
