mgd
Dabbler
- Joined
- Jan 8, 2017
- Messages
- 46
I am running FreeNAS on an ASRock Rack C2550D4I motherboard which has three Ethernet ports:
My plan was to add LAN2 (igb1) to the FreeNAS network configuration on the same subnet as LAN1, then move the physical network cable to LAN2, and finally delete LAN1 from the FreeNAS configuration.
However, from the FreeNAS GUI I cannot setup the LAN2 interface on the same IP subnet as LAN1, and if I delete LAN1 before adding LAN2 I have no connection to the FreeNAS GUI.
Any idea how to accomplish my network LAN interface switch?
- Dedicated IPMI / BMC port
- LAN1 – shared between BMC and the Intel controller seen by FreeNAS
- LAN2 – dedicated to the Intel controller seen by FreeNAS
My plan was to add LAN2 (igb1) to the FreeNAS network configuration on the same subnet as LAN1, then move the physical network cable to LAN2, and finally delete LAN1 from the FreeNAS configuration.
However, from the FreeNAS GUI I cannot setup the LAN2 interface on the same IP subnet as LAN1, and if I delete LAN1 before adding LAN2 I have no connection to the FreeNAS GUI.
Any idea how to accomplish my network LAN interface switch?