Can't assign IPv6 addresses to existing jail setup

[wijagels]

Hello FreeNAS forums, I have a slight problem. I recently setup an ipv6 /64 block for my home network. While I'm still elated by the wonders of IPv6, I would like to assign my various jails public IPv6 addresses. I successfully added IPv6 addressing to the main interface on my box. I tested it and it works fine, everything works great over IPv6 for the main meat of the box. I tried going into the jail configuration page, and I am only presented with options pertaining to IPv4! All the hardware is real, no virtual stuff going on here. The IPv6 addresses are assigned by the wonderful hurricane electric service, and I have everything routed through a pfsense router. The FreeNAS build is 9.1.1-RELEASE-x64 (a752d35). So I want to give my jails IPv6 addresses in some way, even if I have to work in the CLI.
Thanks in advance for any help!

 

[titan_rw]

I was wondering this myself:

http://forums.freenas.org/threads/enabling-ipv6-router-advertisement-in-a-jail.14493/

 

[dlavigne]

Huh, you don't seem to have an advanced mode, which is where IPv6 is set: see Figure 10.2a at
http://doc.freenas.org/index.php/Jails_Configuration. Is this system running UFS or ZFS?

 

[wijagels]

Huh, you don't seem to have an advanced mode, which is where IPv6 is set: see Figure 10.2a at
http://doc.freenas.org/index.php/Jails_Configuration. Is this system running UFS or ZFS?

ZFS.

 

[dlavigne]

Can you please create a bug report at https://bugs.freenas.org/projects/freenas and post the issue number here.

 

[wijagels]

Has anybody reproduced this?
https://bugs.freenas.org/issues/3236

 

[wijagels]

Does anybody know a command line workaround? I'm hunting for a jail config file.