eatapoptart
Cadet
- Joined
- Feb 12, 2023
- Messages
- 3
I am trying to add RaveOS(linux) to my Scale server as a VM because bare metal isnt really an option right now.
I originally tried to pass through a usb drive with the image flashed onto it but the vm doesn't seem to like booting from a usb stick. I then tried to flash a zvol with the image but after flashing it the zvol doesn't show up in any of the drop downs. I can't create a vm with an existing zvol and I can't add a disk device for the same reason. I'm not sure what changes after the flash to stop it from showing up.
0ooonk shows up for the vm but bwz9v doesn't. I used iSCSI on bwz9v to use a raw copy tool to make the linux image on the zvol then removed the zvol from iSCSI.
I also want to pass through a mining gpu (cmp 170hx) but when I do the vm won't start because of a bus problem.
The main problem for now is the zvol disappearing thing as I can't figure out what makes it happen.
The server uses a 10900 and has 128gb of ram. It also contains a 970 for plex transcoding.
I originally tried to pass through a usb drive with the image flashed onto it but the vm doesn't seem to like booting from a usb stick. I then tried to flash a zvol with the image but after flashing it the zvol doesn't show up in any of the drop downs. I can't create a vm with an existing zvol and I can't add a disk device for the same reason. I'm not sure what changes after the flash to stop it from showing up.
0ooonk shows up for the vm but bwz9v doesn't. I used iSCSI on bwz9v to use a raw copy tool to make the linux image on the zvol then removed the zvol from iSCSI.
I also want to pass through a mining gpu (cmp 170hx) but when I do the vm won't start because of a bus problem.
I don't know if its a driver issue because getting a windows driver was a whole thing for this card.[EFAULT] internal error: qemu unexpectedly closed the monitor: 2023-12-12T21:09:04.793520Z qemu-system-x86_64: -device vfio-pci,host=0000:02:00.0,id=hostdev0,bus=pci.0,addr=0x7: vfio 0000:02:00.0: group 1 is not viable Please ensure all devices within the iommu_group are bound to their vfio bus driver.
The main problem for now is the zvol disappearing thing as I can't figure out what makes it happen.
The server uses a 10900 and has 128gb of ram. It also contains a 970 for plex transcoding.