cavalentin
Cadet
- Joined
- Oct 9, 2012
- Messages
- 1
Hello all, I'm a FreeNAS/FreeBSD noob. I've been trying to add a SSD cache drive (e.g. ada2) to an existing ZFS pool ("DATA02"), but I'm receiving the following message, "cannot add to 'DATA02': no such pool or dataset". I'm running FreeNAS-8.3.1-ALPHA-r12085-x64.
At one point, I was able to add the drive to the pool from the command line and it was working. However, I had to reboot the system the other day to add a second NIC, and then the drive became unavailable. I have validated that the SSD drive is good and I can access the "DATA02" pool.
# zpool status DATA02
pool: DATA02
state: ONLINE
scan: scrub repaired 0 in 1h33m with 0 errors on Tue Oct 16 22:47:01 2012
config:
NAME STATE READ WRITE CKSUM
DATA02 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
da0p2 ONLINE 0 0 0
da1p2 ONLINE 0 0 0
da2p2 ONLINE 0 0 0
da3p2 ONLINE 0 0 0
errors: No known data errors
# zpool add DATA02 cache ada2
cannot add to 'DATA02': no such pool or dataset
At one point, I was able to add the drive to the pool from the command line and it was working. However, I had to reboot the system the other day to add a second NIC, and then the drive became unavailable. I have validated that the SSD drive is good and I can access the "DATA02" pool.
# zpool status DATA02
pool: DATA02
state: ONLINE
scan: scrub repaired 0 in 1h33m with 0 errors on Tue Oct 16 22:47:01 2012
config:
NAME STATE READ WRITE CKSUM
DATA02 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
da0p2 ONLINE 0 0 0
da1p2 ONLINE 0 0 0
da2p2 ONLINE 0 0 0
da3p2 ONLINE 0 0 0
errors: No known data errors
# zpool add DATA02 cache ada2
cannot add to 'DATA02': no such pool or dataset