SOLVED Can't access to UI after nic change, looking for network cli documentation.

[androme]

Hello, my truenas was ok, but since i swapped nic, the ui is not reachable anymore.
I looked for cli documentation but nothing founded, is a place to find this documentation ?
I need to reconfigure network of my truenas via cli.

thank you and have a good day.
sorry for my average english.
Thierry

 

[Redcoat]

Take a look here and see if this gets you started https://www.truenas.com/docs/scale/gettingstarted/post-installconfiguration/

Start with Item 1 on the console menu to get the NIC "up".

Example at bottom of page may be useful guide.

 

[androme]

Thanks a lot.

 

[Redcoat]

Thanks a lot.

I assume that you were able to get it working!

If so. please mark the thread solved using the edit button at the top of the thread.

 

[androme]

Where can i mark this post as resolved ? i can't find any button on this thread, i'm surely blind :).

 

[Redcoat]

It's at the top right hand side of the thread postings - I can't see it because this isn't my thread, but it's adjacent to the "Jump to New" and "Unwatch" button locations. I think it says "Edit xxx" or similar: