Borja
Contributor
- Joined
- Oct 20, 2015
- Messages
- 120
Hello,
I know its not very recommended and this kind of external enclosure are not fully supported. I replaced my main 4 disks for bigger ones and i want to use the olders to have more space dedicated to non critical tasks. For that, i have a 4 bay USB3 IcyBOX.
I have installed the disks on the icyBOX and connected to the freenas system using USB3. I can see the disks from the system using command:
The last 4 disk are the externals.
Problem is when i try to import the disks, in the context menu there are only two which "da4p1" and "da4p2". Dont know how can i import the rest two disks.
The disks are not formatted have the RAID-Z1 config used before.
Any ideas?
I know its not very recommended and this kind of external enclosure are not fully supported. I replaced my main 4 disks for bigger ones and i want to use the olders to have more space dedicated to non critical tasks. For that, i have a 4 bay USB3 IcyBOX.
I have installed the disks on the icyBOX and connected to the freenas system using USB3. I can see the disks from the system using command:
Code:
root@NASI:~ # camcontrol devlist <TOSHIBA HDWG460 0601> at scbus0 target 0 lun 0 (pass0,ada0) <TOSHIBA HDWG460 0601> at scbus1 target 0 lun 0 (pass1,ada1) <TOSHIBA HDWG460 0601> at scbus2 target 0 lun 0 (pass2,ada2) <TOSHIBA HDWG460 0601> at scbus3 target 0 lun 0 (pass3,ada3) <AHCI SGPIO Enclosure 2.00 0001> at scbus6 target 0 lun 0 (ses0,pass4) <HP iLO Internal SD-CARD 2.10> at scbus8 target 0 lun 0 (da0,pass5) <H/W DISK 1 0523> at scbus9 target 0 lun 0 (da1,pass6) <H/W DISK 2 0523> at scbus9 target 0 lun 1 (da2,pass7) <H/W DISK 3 0523> at scbus9 target 0 lun 2 (da3,pass8) <H/W DISK 4 0523> at scbus9 target 0 lun 3 (da4,pass9) root@NASI:~ #
The last 4 disk are the externals.
Problem is when i try to import the disks, in the context menu there are only two which "da4p1" and "da4p2". Dont know how can i import the rest two disks.
The disks are not formatted have the RAID-Z1 config used before.
Any ideas?