ColinJack
Dabbler
- Joined
- Feb 21, 2014
- Messages
- 18
I'm assuming I have got something wrong (although I have been battling this for days without success) and hopefully someone will put me right.
Running 9.2.1.3 rel
I have 3 NICs - I have set em0 up as a management NIC on our normal LAN subnet (192.168.128.0/24) and created a round robin LAGG with the other two (em1 & em2) and put them into a VLAN with a different subnet to our production subnet (10.10.10.0/24) with a view to using this for the VMWare iSCSI connection. Both em0 and lagg are setup as interfaces.
I have created an iSCSI target and set the portal to 0.0.0.0
I can access iSCSI on the 192.168.128.0 subnet fine.
I cannot get any response from the LAGG interface - can't even ping it, no access to management GUI etc. Yes, I am trying to access this from the correct subnet/vlan.
I have set the options on the LAGG to 'up mtu 9000'
Can anybody tell me what I have done wrong please? This is driving me nuts!
Thanks
Colin
Running 9.2.1.3 rel
I have 3 NICs - I have set em0 up as a management NIC on our normal LAN subnet (192.168.128.0/24) and created a round robin LAGG with the other two (em1 & em2) and put them into a VLAN with a different subnet to our production subnet (10.10.10.0/24) with a view to using this for the VMWare iSCSI connection. Both em0 and lagg are setup as interfaces.
I have created an iSCSI target and set the portal to 0.0.0.0
I can access iSCSI on the 192.168.128.0 subnet fine.
I cannot get any response from the LAGG interface - can't even ping it, no access to management GUI etc. Yes, I am trying to access this from the correct subnet/vlan.
I have set the options on the LAGG to 'up mtu 9000'
Can anybody tell me what I have done wrong please? This is driving me nuts!
Thanks
Colin