Robert Smith
Patron
- Joined
- May 4, 2014
- Messages
- 270
Hi,
Is anybody running into these “CAM status: Uncorrectable parity/CRC error” with on-board SATA ports on the AsRock E3C226D2I motherboard?
I have an Intel Core i3-4350 system with 16 GB ECC memory built on the E-ITX CFI A7879 Mini-ITX chasees, with four 4TB NAS-grade hard drives.
The error is not there all the time. The system could run fine for a few months, and then it pops out of the blue. No correlation to UPS events.
Smartctl ether shows nothing of note or it shows increase in UDMA_CRC_Error_Count. Scheduled long/short tests and scrubs are running.
Contemplating what to do next; what would you recommend?
Relevant thread: https://forums.freenas.org/index.php?threads/uncorrectable-parity-crc-error.14404/
Is anybody running into these “CAM status: Uncorrectable parity/CRC error” with on-board SATA ports on the AsRock E3C226D2I motherboard?
I have an Intel Core i3-4350 system with 16 GB ECC memory built on the E-ITX CFI A7879 Mini-ITX chasees, with four 4TB NAS-grade hard drives.
- At first I started getting the error on ada0. I replaced the hard drive on ada0 with a new one, the errors stayed.
- I replaced the SATA cable on ada0 with a new one. The error moved to ada2.
- I replaced the rest of the SATA cables with new ones. Still get the error on the ada2.
The error is not there all the time. The system could run fine for a few months, and then it pops out of the blue. No correlation to UPS events.
Smartctl ether shows nothing of note or it shows increase in UDMA_CRC_Error_Count. Scheduled long/short tests and scrubs are running.
Contemplating what to do next; what would you recommend?
Relevant thread: https://forums.freenas.org/index.php?threads/uncorrectable-parity-crc-error.14404/