CAM status: SCSI status error

[fx24]

> (da15:mps1:0:7:0): WRITE(10). CDB: 2a 00 b6 2e 15 80 00 00 40 00
> (da15:mps1:0:7:0): CAM status: SCSI Status Error
> (da15:mps1:0:7:0): SCSI status: Check Condition
> (da15:mps1:0:7:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
> (da15:mps1:0:7:0): Info: 0xb62e1580
> (da15:mps1:0:7:0): Error 22, Unretryable error

It has persisted from FreeNAS 9.2 to 9.3, the consequent driver and firmware updates, replaced PSU, replaced data cables and replacement of power cables to drive bays. The only thing I have left on my to-try list is affixing a fan to cover the HBA controller. Aside from this, I am out of ideas.

I really wish I could squash this once and for all.

 

[Mirfster]

So what firmware are you running on your LSI 9201-16i right now? I see there is a P20 that was released on 04/04/2016..

http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9201-16i#downloads

 

[fx24]

So what firmware are you running on your LSI 9201-16i right now? I see there is a P20 that was released on 04/04/2016..

http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9201-16i#downloads

I am on an earlier version of P20 that I did 9/2015. I wasn't aware of this being released last month.

 

[Mirfster]

Me either, just poked around real quick. Heck I don't even run that card (Perc H200 cross-flashed to LSI 9211-8i here). Hopefully it helps. ;)

 

[Ericloewe]

P20.0.0.06 or whatever they call the new version?

LSI's current firmware/driver release model is seriously broken. Mismatched version numbers, unclear point point revisions, ...

 

[fx24]

I already have enough problems and don't think it will fix my problem. I'll probably update once I see other users updating to it without issue.

I wish that I could narrow the scope of my issue. I want to build another FreeNAS box but am hesitant until I get this resolved.

 

[Mirfster]

Out of curiosity are you using this with VMWare or iSCSI?

 

[fx24]

Out of curiosity are you using this with VMWare or iSCSI?

I am not; just storage with SMB access.

 

[cyberjock]

Just an opinion for those that "care what I think or have knowledge of"... I don't think there's any reason to upgrade from the 20.00.04 that really matters. TrueNAS servers are still on 20.00.04 and there is no upgrade currently in the works to go to 20.00.06 or 20.00.07 that I know of. :P

As a result, I'm still on 20.00.04 on all of my systems and I plan to stay there. ;)

 

[hynix]

Im running 9.10 with 20.00.04.00

[root@nas] ~# dmesg | grep mps
mps0: <Avago Technologies (LSI) SAS2008> port 0x4000-0x40ff mem 0xfd5fc000-0xfd5fffff,0xfd580000-0xfd5bffff irq 18 at device 0.0 on pci3
mps0: Firmware: 20.00.04.00, Driver: 20.00.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
mps0: SAS Address for SATA device = 83985b2fa19daa79
mps0: SAS Address from SATA device = 83985b2fa19daa79
mps0: SAS Address for SATA device = df843423a4b5988a
mps0: SAS Address from SATA device = df843423a4b5988a
mps0: SAS Address for SATA device = 7e973a1ea5ad908e
mps0: SAS Address from SATA device = 7e973a1ea5ad908e
mps0: SAS Address for SATA device = 83974e38b8acc69a
mps0: SAS Address from SATA device = 83974e38b8acc69a
da3 at mps0 bus 0 scbus3 target 5 lun 0
da4 at mps0 bus 0 scbus3 target 6 lun 0
da1 at mps0 bus 0 scbus3 target 0 lun 0
da2 at mps0 bus 0 scbus3 target 2 lun 0
(da1:mps0:0:0:0): READ(6). CDB: 08 00 00 80 10 00
(da1:mps0:0:0:0): CAM status: SCSI Status Error
(da1:mps0:0:0:0): SCSI status: Check Condition
(da1:mps0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,3 (Information unit iuCRC error detected)
(da1:mps0:0:0:0): Retrying command (per sense data)
(da1:mps0:0:0:0): READ(6). CDB: 08 00 00 80 10 00
(da1:mps0:0:0:0): CAM status: SCSI Status Error
(da1:mps0:0:0:0): SCSI status: Check Condition
(da1:mps0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,3 (Information unit iuCRC error detected)
(da1:mps0:0:0:0): Retrying command (per sense data)

anyone not having this issue ?

 

[Mirfster]

I know this is an aged post, but are you still seeing these issues? Just trying to correlate some data to see if I can spot a trend...

 

[fx24]

I know this is an aged post, but are you still seeing these issues? Just trying to correlate some data to see if I can spot a trend...

I never resolved the problem.

 

[Mirfster]

I never resolved the problem.

Sorry to hear that, so are you running FreeNAS at this point or have you gone another route?

 

[fx24]

Sorry to hear that, so are you running FreeNAS at this point or have you gone another route?

I still believe in FreeNAS and am actually building a new box, but this time using a Supermicro case. If this turns out alright, I'll redo my first box.