sgtslaughter009
Dabbler
- Joined
- Jan 9, 2015
- Messages
- 12
Hey guys im pretty new to the forum and am having some trouble with a nas i built. The nas was up and running for a about 6 months. Mounted the drives created permissions etc etc etc. I was away from my HQ for some time upon which i decided to look for some files and noticed my drive was no longer mounted. I then tried to connect to the webgui and it was not found either. I plugged in a keyboard mouse and monitor into the box and began to troubleshoot. The first thing i notice is that upon allowing it boot all the way is that it comes up with a "bus error" in addition it tells me that it cannot import "NastyNAS': I/O error. It then tells me to run zpool import -F NastyNAS although im not sure where i can run that command to begin recovery. I have attached a video of the device booting in addition to a few screen shots. Any help or suggestions is much appreciated i have 10yrs of my kids pics on here. Thanks in advance
Also here are my specs:
7gb Memory
Intel Pentium Dual Core E52002.50Ghz
5x 3.5 hard disks configured for Raid (not sure which) on the ZFS format
1x usb drive that i booted free nas from for initial install
Also here are my specs:
7gb Memory
Intel Pentium Dual Core E52002.50Ghz
5x 3.5 hard disks configured for Raid (not sure which) on the ZFS format
1x usb drive that i booted free nas from for initial install
Attachments
Last edited: